This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X30SU — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X30SU in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X30SU, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X30SU
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU
The AirTAC MAL32X30SU is a discontinued double-acting aluminum mini round cylinder. It delivers a 402 N push and 346 N pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X30SU, matching the 32 mm bore, 30 mm stroke, G1/8 port, and U flat-end rear cover.
This legacy unit features a threaded front and back cover, whereas the current MBL uses a riveted rolling-packed body. The -S magnet on this SKU works with older CS1-M or DS1-M switches; upgrading to the MBL requires the modern CMSG, DMSG, or EMSG sensor family. The piston relies on a heterogeneous two-way seal that retains grease, running smoothly on a self-lubricating front-cover bearing guide.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X30SU |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X30SU carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X30SU produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×30 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU Is Used
Carton Flap Folding
Drives short 30 mm stroke flap folders on compact packaging lines, utilizing the 402 N push force to cleanly tuck cardboard without stalling.
PCB Test Socket
Actuates an electronics test fixture socket, applying precise 346 N pull at 0.5 MPa to seat a circuit board against spring contacts.
Valve Stem Seating
Presses small pneumatic valve stems into housings on an assembly carousel, where the rigid U flat-end cover maintains strict axial alignment.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU with MBL32X30SU
To replace the MAL32X30SU, order the MBL32X30SU. Confirm the 32 mm bore, 30 mm stroke, PT thread, and the U flat-end back cover. Because this SKU includes the -S magnet, your existing CS1-M or DS1-M switches will not fit the new body; you must update to CMSG, DMSG, or EMSG sensors. If you need to step down, the 25 mm bore offers 245 N push at 0.5 MPa. If you need more power, the 40 mm bore provides 628 N push at 0.5 MPa. The fixed rubber bumper softens end-of-stroke impact, but it will not hold a load if air pressure drops; use a pilot-operated check valve for position holding. If end-cushioning is inadequate, the MBLC offers an adjustable air cushion.
Upgrade checklist
- ✓ Order the MBL32X30SU (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X30SU instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU FAQ
Yes, the MAL32X30SU is discontinued. The exact drop-in replacement is the MBL32X30SU, which matches the 32 mm bore, 30 mm stroke, 82 kgf max force, G1/8 port, and U flat-end cover. You will need to update your sensors, as the new MBL body uses CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X30SU replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X30SU → MBL32X30SU)
Tell us the quantity and destination — we quote the drop-in MBL32X30SU replacement with price, stock and lead time, usually within 7-8 hours.