This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X320SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X320SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 320mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X320SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke320 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X320SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA
The AirTAC MAL32X320SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 320mm stroke. It delivers 402N of push force and 346N of pull force at 0.5 MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. AirTAC has replaced this legacy unit with the MBL32X320SCA, a drop-in alternative that matches the exact bore, stroke, output force, port size, and CA pivot mounting.
This specific SKU includes a built-in magnet (-S) for position detection and a CA pivot back cover designed to swing on a pin for arcing applications. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Additionally, the -S magnet on this discontinued cylinder operates with the older CS1-M and DS1-M reed switches, while the MBL successor transitions to the current CMSG, DMSG, or EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X320SCA |
| Bore size | Ø32 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X320SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X320SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×320 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA Is Used
Packaging Conveyor Diverter
Articulates via the CA pivot to push cartons across a packaging line, utilizing the 402N push force at 0.5 MPa to overcome side friction during product transfer.
Textile Loom Tensioner
Swings a tensioning idler arm on a clevis pin, using the 320mm stroke to maintain fabric tension while the self-lubricating front-cover bearing guide handles rapid rod oscillation.
Warehouse Sorter Gate
Actuates a hinged sorting gate for parcel routing, where the CA pivot absorbs arcing rod movement and the -S magnet triggers a DS1-M switch for transit confirmation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA with MBL32X320SCA
To replace the MAL32X320SCA, order the MBL32X320SCA. Confirm your 32mm bore, 320mm stroke, G1/8 port, and default PT thread form. The CA pivot back cover is crucial for arcing load paths, so ensure your existing pin mount is retained. Because this SKU includes the -S magnet, you must upgrade your position sensing from the legacy CS1-M or DS1-M switches to the modern CMSG, DMSG, or EMSG families used by the MBL.
If you need to step down, the 25mm bore neighbor provides 245N push at 0.5 MPa. Stepping up to the 40mm bore yields 628N push at 0.5 MPa. At 320mm of stroke, the 12mm rod is highly susceptible to bending under side loads; use an external guide rail or ensure the CA pivot can freely articulate. The MAL uses a fixed rubber bumper, so if end-of-stroke energy requires adjustable damping, step up to the current MBLC line. Finally, a plain MBL does not hold a load when air pressure drops; add an external rod lock or pilot-operated check valve for fail-safe holding.
Upgrade checklist
- ✓ Order the MBL32X320SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X320SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA FAQ
Yes, the MAL32X320SCA is discontinued. The exact drop-in replacement is the MBL32X320SCA, which matches the 32mm bore, 320mm stroke, G1/8 port, and CA pivot mounting. The MBL upgrades the body to a riveted rolling-packed design and requires CMSG, DMSG, or EMSG sensors to replace the older CS1-M or DS1-M switches used on the MAL -S magnet.
The 32mm bore generates 402N push and 346N pull at 0.5 MPa, 563N push at 0.7 MPa, and a maximum theoretical force of 82kgf at 1.0 MPa. It uses a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion. If adjustable air cushioning is required, you must use the current MBLC variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X320SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X320SCA → MBL32X320SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X320SCA replacement with price, stock and lead time, usually within 7-8 hours.