This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X33CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X33CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 33mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X33CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke33 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X33CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA
The AirTAC MAL32X33CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 33mm stroke. It delivers 402N of push force at 0.5MPa. The exact drop-in replacement is the MBL32X33CA, which matches the bore, stroke, output force, G1/8 port, and CA pivot mounting. You can install the MBL without modifying the existing assembly.
This legacy unit features a CA pivot back cover designed to swing on a pin for arcing loads. It uses a fixed rubber bumper for end-of-stroke damping, not an adjustable cushion. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for greater structural integrity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X33CA |
| Bore size | Ø32 mm |
| Stroke | 33 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X33CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X33CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×33 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA Is Used
Textile Loom Yarn Guide
Swings a yarn guide arm into position on a weaving loom, using the CA pivot to accommodate the slight arcing motion while providing 402N of push force at 0.5MPa.
Package Flap Folder
Folds cardboard end flaps on a small packaging conveyor, relying on the 33mm stroke and fixed rubber bumper to absorb the rapid impact without damaging the carton.
Bottle Sorting Diverter
Pivots a diverter gate on a bottle sorting line to route glass containers, utilizing the self-lubricating front-cover bearing to maintain smooth operation in a tight space.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA with MBL32X33CA
To replace the MAL32X33CA, order the MBL32X33CA. Confirm your 32mm bore, 33mm stroke, G1/8 port, and PT thread form. The CA pivot back cover is essential for arcing loads, so retain the same pivot pin. If your machine needs a position sensor, this no-magnet SKU cannot support one; you must order an MBL32X33CAS instead, which upgrades you to the current CMSG, DMSG, or EMSG switch family.
If you need to adjust your force output, step down to the 25mm bore (245N push at 0.5MPa) or step up to the 40mm bore (628N push at 0.5MPa). For heavier end-stop impacts, the current MBLC line offers an adjustable air cushion that the MAL fixed rubber bumper cannot provide. A plain cylinder drifts when air is lost, so add an external rod lock for strict position holding.
Upgrade checklist
- ✓ Order the MBL32X33CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X33CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA FAQ
Yes, the MAL32X33CA is discontinued. The exact drop-in replacement is the MBL32X33CA. It provides the same 32mm bore, 33mm stroke, CA pivot mounting, G1/8 port, and output force. The modern MBL uses a riveted rolling-packed body instead of the older threaded covers, but mounts identically.
The 32mm bore generates a push force of 402N and a pull force of 346N at 0.5MPa. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa. Note that this specific SKU has no -S magnet, so it cannot accept a CS1-M or DS1-M position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X33CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X33CA → MBL32X33CA)
Tell us the quantity and destination — we quote the drop-in MBL32X33CA replacement with price, stock and lead time, usually within 7-8 hours.