This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X350-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X350-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X350-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke350 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X350-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA
The AirTAC MAL32X350-CA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 350 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X350-CA, a drop-in upgrade retaining the exact same bore, stroke, output force, G1/8 port, and CA pivot mounting.
This legacy MAL features threaded front and back covers, whereas the modern MBL body uses a riveted rolling-packed construction. Because this specific SKU lacks the -S magnet option, it cannot accept a position sensor. The internal piston relies on a heterogeneous two-way seal that retains grease, paired with a self-lubricating front-cover bearing guide to support the 12 mm carbon-steel rod.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X350-CA |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X350-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X350-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×350 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA Is Used
Pouch Packaging Diverter
Uses the 402 N thrust at 0.5 MPa and the CA pivot mount to swing a diverter arm, routing sealed pouches on a packaging conveyor.
Textile Loom Tensioner
Cycles the 350 mm stroke to position a yarn tensioning bar, relying on the self-lubricating bearing guide for continuous high-speed operation.
Warehouse Carton Pusher
Pushs cardboard cartons from a roller accumulation line, utilizing the fixed rubber bumper to soften the end of the 350 mm extension.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA with MBL32X350-CA
To replace this actuator, order the MBL32X350-CA. Confirm your 350 mm stroke, G1/8 port, and PT thread form. The CA pivot back cover swings on a pin to accommodate arcing loads, which is critical for a 350 mm stroke where side-loading is a concern. If your mechanism requires end-of-stroke cushioning, note that the MAL only has a fixed rubber bumper; you should step up to the MBLC for an adjustable air cushion. If you need position detection, the MBL upgrade requires adding an -S magnet and uses CMSG / DMSG / EMSG switches instead of the older CS1-M / DS1-M.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. Remember that a plain cylinder does not hold its load if air pressure drops; add an external rod lock for vertical safety.
Upgrade checklist
- ✓ Order the MBL32X350-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X350-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA FAQ
Yes, the MAL32X350-CA is discontinued. The exact drop-in replacement is the MBL32X350-CA, which matches the 32 mm bore, 350 mm stroke, G1/8 port, and CA pivot mount. The MBL upgrades the body to a riveted rolling-packed design.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X350-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X350-CA → MBL32X350-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X350-CA replacement with price, stock and lead time, usually within 7-8 hours.