This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X35SU — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X35SU in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X35SU, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke35 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X35SU
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU
The AirTAC MAL32X35SU is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 35mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa. The exact drop-in replacement is the MBL32X35SU, which matches the bore, stroke, output force, G1/8 port, and U flat-end back cover for seamless integration.
This legacy unit features a threaded front and rear cover, whereas the modern MBL32X35SU utilizes a riveted rolling-packed body. Because this SKU includes the -S magnet, it originally paired with CS1-M or DS1-M switches; upgrading to the MBL requires switching to the current CMSG, DMSG, or EMSG sensor families. The rod is 12mm carbon steel with 20um hard chrome plating, guided by a self-lubricating front-cover bearing and a grease-retaining two-way seal.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X35SU |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X35SU carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X35SU produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×35 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU Is Used
PCB Router Spindle Clamp
Secures a small routing spindle during automated depaneling. The 402N push force at 0.5MPa provides rigid holding against cutting vibration, while the 35mm stroke accommodates varying board thicknesses.
Carton Flap Folder
Folds minor flaps on small packaging cartons. The U flat-end back cover mounts rigidly to the machine frame, and the 346N pull force reliably retracts the 12mm rod to clear the packaging path.
Connector Insertion Press
Pushes IC sockets into populated circuit boards. The -S magnet allows a DS1-M switch to confirm the exact 35mm extension before the press cycle completes, preventing component damage.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU with MBL32X35SU
To replace the MAL32X35SU, order the MBL32X35SU and verify your 32mm bore, 35mm stroke, G1/8 port, and U flat-end back cover. The default PT tapered thread form must match your fittings. Because this SKU has the -S magnet, plan to replace your legacy CS1-M or DS1-M sensors with CMSG, DMSG, or EMSG switches. If your application requires position holding when air pressure drops, note that neither this MAL nor the MBL acts as a lock; you must add an external rod lock or pilot-operated check valve. If you need adjustable end-of-stroke cushioning, step up to the MBLC variant, as the MAL only provides a fixed rubber bumper.
For sizing flexibility, you can step down to the 25mm bore (245N push at 0.5MPa) for lighter loads, or step up to the 40mm bore (628N push at 0.5MPa) if you need more thrust. The 35mm stroke is short enough to avoid rod-bending side-load issues, but always ensure the load is axially aligned to protect the 12mm rod.
Upgrade checklist
- ✓ Order the MBL32X35SU (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X35SU instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU FAQ
Yes, the AirTAC MAL32X35SU is discontinued. The exact drop-in replacement is the MBL32X35SU. It features the same 32mm bore, 35mm stroke, output force, G1/8 port, and U flat-end mounting. The main upgrade is the MBL's riveted rolling-packed body replacing the MAL's threaded covers. If you use the -S magnet, you must upgrade your old CS1-M or DS1-M switches to the CMSG, DMSG, or EMSG family.
The 32mm bore double-acting cylinder generates a push force of 402N and a pull force of 346N at 0.5MPa. At 0.7MPa, the push force increases to 563N. The maximum theoretical force is 82kgf at 1.0MPa. It operates at speeds of 30-800mm/s and uses a fixed rubber bumper rather than an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X35SU replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35SU → MBL32X35SU)
Tell us the quantity and destination — we quote the drop-in MBL32X35SU replacement with price, stock and lead time, usually within 7-8 hours.