This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X35U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X35U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X35U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke35 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X35U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U
The AirTAC MAL32X35U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 35mm stroke. It delivers 402N push and 346N pull at 0.5MPa through a G1/8 port. The exact drop-in replacement is the MBL32X35U, which matches the original force, stroke, and flat U back cover. The legacy MAL used threaded front and back covers, whereas the current MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU lacks an -S magnet, meaning it cannot support a position sensor. Internally, the piston relies on a heterogeneous two-way seal that retains grease, complemented by a self-lubricating front-cover bearing guide. The carbon-steel rod features 20um hard-chrome plating for wear resistance. End-of-stroke energy is absorbed by a fixed rubber bumper, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X35U |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X35U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X35U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×35 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U Is Used
PCB Depaneling Saw Gate
Actuates a pneumatic gate on a PCB depaneling router, using the 402N push force at 0.5MPa to isolate singulated boards without stressing the fragile traces.
Carton Erector Flap Folder
Folds minor flaps on a small carton erector, where the 346N pull force cleanly retracts the 12mm rod and the rigid U flat-end back cover mounts flush to the machine frame.
Diagnostic Cartridge Lifter
Raises microfluidic diagnostic cartridges into a test head, benefiting from the 35mm short stroke and fixed rubber bumper to soften the impact at the test position.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U with MBL32X35U
To replace the MAL32X35U, order the MBL32X35U. Verify your 32mm bore, 35mm stroke, G1/8 port, and the rigid U flat-end back cover. Because this SKU has no -S magnet, you cannot mount a sensor; if you need position detection, step up to an MBL32X35SUS and use the current CMSG/DMSG/EMSG switches instead of the old CS1-M/DS1-M. The fixed rubber bumper cannot be adjusted; if your application needs precise end-of-stroke deceleration, upgrade to the MBLC variant which offers an adjustable air cushion.
For sizing, stepping down to the 25mm bore drops the 0.5MPa push force to 245N, while stepping up to the 40mm bore increases it to 628N. A plain MBL does not hold its load when air is lost, as the rod drifts; use an external rod lock or pilot-operated check valve for fail-safe holding. The 35mm stroke keeps side-load risk low, but the 12mm rod still has limited bending tolerance if heavily loaded.
Upgrade checklist
- ✓ Order the MBL32X35U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X35U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X35U. It provides the same 32mm bore, 35mm stroke, G1/8 port, and flat U back cover. You simply order the MBL equivalent; the only difference is a riveted rolling-packed body instead of the original threaded covers.
At 0.5MPa, the 32mm bore provides 402N push and 346N pull. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa. Note that this specific U-cover SKU lacks a magnet, so it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X35U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X35U → MBL32X35U)
Tell us the quantity and destination — we quote the drop-in MBL32X35U replacement with price, stock and lead time, usually within 7-8 hours.