This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X360SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X360SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 360mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X360SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke360 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X360SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM
The AirTAC MAL32X360SCM is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 360 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X360SCM, which matches the original bore, stroke, output force, G1/8 port, and CM round-end back cover exactly.
This SKU includes a built-in magnet (-S) for position detection. On the legacy MAL, this magnet pairs with older CS1-M or DS1-M reed switches, but the MBL replacement transitions to the current CMSG, DMSG, or EMSG sensor families. The original MAL features threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body for structural rigidity. A heterogeneous two-way seal retains grease for prolonged friction-free cycling.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X360SCM |
| Bore size | Ø32 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X360SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X360SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×360 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM Is Used
PCB Panel Diverter
Pushes populated circuit boards sideways onto a secondary testing lane using 402 N of force at 0.5 MPa without damaging delicate solder joints.
Carton Flap Folder
Extends 360 mm to fold the minor inner flaps of corrugated shipping cartons prior to tape sealing in continuous packaging lines.
Textile Loom Guide
Shifts a yarn tensioning guide back and forth across the weaving bed, relying on the self-lubricating bearing to handle high-frequency 30-800 mm/s cycling.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM with MBL32X360SCM
To replace the MAL32X360SCM, order the MBL32X360SCM. Confirm the 32 mm bore, 360 mm stroke, G1/8 port, and PT tapered thread. You must also account for the sensor family change: the -S magnet on your legacy cylinder used CS1-M or DS1-M switches, while the new MBL requires CMSG, DMSG, or EMSG sensors. The CM round-end back cover on this unit is designed for basic through-hole mounting rather than rigid flange bolting.
If you need to adjust your force output, stepping down to a 25 mm bore drops the 0.5 MPa push force to 245 N, while stepping up to a 40 mm bore increases it to 628 N. Because the stroke is 360 mm, the 12 mm rod is highly susceptible to bending under lateral stress; use an external guide rail or a pivot joint to absorb any side loads. Note that the fixed rubber bumper softens end-of-stroke impacts but does not hold the load if air pressure drops—install a pilot-operated check valve for position holding. If your application requires adjustable end-cushioning to dissipate kinetic energy, step up to the MBLC variant on the current line.
Upgrade checklist
- ✓ Order the MBL32X360SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X360SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM FAQ
Yes, the MAL32X360SCM is discontinued. The exact drop-in replacement is the MBL32X360SCM, which offers identical bore, stroke, force, port, and mounting. The main difference is that the MBL uses a riveted rolling-packed body instead of threaded covers, and the -S magnet requires CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
At 0.5 MPa operating pressure, the 32 mm bore provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The cylinder operates at speeds of 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X360SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X360SCM → MBL32X360SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X360SCM replacement with price, stock and lead time, usually within 7-8 hours.