This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X380SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X380SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 380mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X380SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke380 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X380SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA
The AirTAC MAL32X380SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 380mm stroke, delivering 402N of push force at 0.5MPa. It features a built-in magnet (-S) and a CA pivot back cover. The exact drop-in replacement is the MBL32X380SCA, matching the bore, stroke, output force, G1/8 port, and mounting accessories perfectly.
This legacy unit uses threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. The -S magnet on this MAL works with the older CS1-M and DS1-M switches, but upgrading to the MBL means transitioning to the current CMSG, DMSG, or EMSG sensor family. A fixed rubber bumper absorbs end-of-stroke impact, though it cannot hold the load if air pressure drops.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X380SCA |
| Bore size | Ø32 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X380SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X380SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×380 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA Is Used
Textile Loom Tensioning
Swings on the CA pivot to maintain consistent fabric tension on a weaving loom, using the 402N push force at 0.5MPa to guide yarn strands over a 380mm travel distance.
Package Sorting Diverter
Actuates a diverter arm on a logistics conveyor belt, relying on the 563N push force at 0.7MPa to push parcels onto a secondary chute within tight machinery spaces.
Palletizing Robot Gate
Opens and closes a compact safety gate on a palletizing cell, where the 380mm stroke provides the necessary clearance for robotic arms to pass through.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA with MBL32X380SCA
To replace the MAL32X380SCA, order the MBL32X380SCA and confirm the 32mm bore, 380mm stroke, PT thread, G1/8 port, and CA pivot back cover. Because this SKU includes the -S magnet, note that your existing CS1-M or DS1-M reed switches must be swapped for CMSG, DMSG, or EMSG sensors on the new MBL body. If your application requires adjustable air cushioning rather than the standard fixed rubber bumper, step up to the MBLC variant on the current line.
At 380mm of travel, the 12mm rod is highly susceptible to bending under side loads; always use an external guide or let the CA pivot bracket swing on a pin to absorb misalignment. For sizing flexibility, you can step down to the 25mm bore (delivering 245N push at 0.5MPa) for lighter loads, or step up to the 40mm bore (providing 628N push at 0.5MPa) for higher force demands. Remember that a plain cylinder drifts when air is lost, so add an external rod lock for position holding.
Upgrade checklist
- ✓ Order the MBL32X380SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X380SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA FAQ
Yes, the AirTAC MAL32X380SCA is discontinued. The exact drop-in replacement is the MBL32X380SCA, which shares the same 32mm bore, 380mm stroke, CA pivot mounting, G1/8 port, and output force. You must only update your sensors, as the MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M family.
The 32mm bore provides a push force of 402N and a pull force of 346N at 0.5MPa. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa. It operates at 0.1-1.0MPa with a speed range of 30-800mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X380SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X380SCA → MBL32X380SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X380SCA replacement with price, stock and lead time, usually within 7-8 hours.