This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X400-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X400-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X400-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X400-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM
The AirTAC MAL32X400-CM is a discontinued double-acting mini round cylinder with a 32mm bore and 400mm stroke. It delivers 402N of push force and 346N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X400-CM, which matches the original bore, stroke, output force, G1/8 port, and CM round-end mounting exactly.
This legacy unit features a CM round-end back cover for pivot-style articulation and a PT tapered port thread. Because this specific SKU lacks the -S magnet option, it cannot support a position sensor. The original MAL body used threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for enhanced structural integrity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X400-CM |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X400-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X400-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×400 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM Is Used
Packaging Conveyor Diverter
Actuates a routing flap on a 200mm wide packaging belt, using the 402N push force at 0.5 MPa to deflect small cardboard cartons at high speed.
Textile Loom Tensioner
Shifts a yarn guide bar across a 400mm weaving width, relying on the CM round-end back cover to pivot smoothly and accommodate minor frame misalignment.
Palletizer Strip Pusher
Sweeps lightweight plastic film strips into a stacking zone, where the 346N pull force safely retracts the 12mm rod despite the extended 400mm length.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM with MBL32X400-CM
To replace the MAL32X400-CM, order the MBL32X400-CM. Verify your 32mm bore, 400mm stroke, G1/8 port, PT thread, and CM round-end back cover. Since this SKU has no -S magnet, you cannot mount a sensor; if you now need position detection, upgrade to an MBL32X400S-CM and use the current CMSG, DMSG, or EMSG switches instead of the legacy CS1-M or DS1-M. If your application requires adjustable end-cushioning rather than the fixed rubber bumper found on the MAL, step up to the MBLC variant.
For sizing flexibility, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push. At 400mm of stroke, the 12mm rod is highly susceptible to bending under side-loads; you must use an external guide rail or ensure the CM round-end pivot absorbs any misalignment. Furthermore, this cylinder cannot hold a load if air pressure drops; add an external pilot-operated check valve for suspension tasks.
Upgrade checklist
- ✓ Order the MBL32X400-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X400-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM FAQ
Yes, the MAL32X400-CM is discontinued. The exact drop-in replacement is the MBL32X400-CM, which offers the same 32mm bore, 400mm stroke, G1/8 port, and CM round-end mounting. The modern MBL uses a riveted rolling-packed body instead of the older threaded covers, but maintains identical performance.
At 0.5 MPa, it provides 402N push and 346N pull force. At 0.7 MPa, push increases to 563N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; the MBL32X400S-CM is required for CMSG, DMSG, or EMSG switch integration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X400-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-CM → MBL32X400-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X400-CM replacement with price, stock and lead time, usually within 7-8 hours.