This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X400-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X400-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X400-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke400 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X400-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA
The AirTAC MAL32X400-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 400 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X400-S-CA, a true drop-in alternative retaining the exact same bore, stroke, output force, G1/8 port, and CA pivot mounting.
This SKU features a built-in -S magnet for position detection. On the original MAL, this magnet pairs with the older CS1-M and DS1-M reed switches, but the MBL successor transitions to the current CMSG, DMSG, or EMSG sensor families. Additionally, the older MAL utilizes threaded front and back covers, whereas the modern MBL employs a riveted rolling-packed body for structural rigidity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X400-S-CA |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X400-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X400-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×400 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA Is Used
PCB routing head feed
Drives a light-duty routing spindle across 400 mm to trim edge connectors on printed circuit boards, utilizing the 402 N push force to maintain routing depth.
Textile yarn guide
Shifts a ceramic yarn guide back and forth across a 400 mm weaving width, where the CA pivot bracket absorbs the slight arc of the traversing mechanism.
Carton flap folder
Extends 400 mm to fold minor carton flaps prior to tape sealing in packaging lines, relying on the 346 N retract force to reset quickly.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA with MBL32X400-S-CA
To replace the MAL32X400-S-CA, order the MBL32X400-S-CA. Verify your porting (PT thread standard, G1/8 port), the M10x1.25 rod-end thread, and the CA pivot back cover, which swings on a pin to accommodate arcing loads. Because the -S magnet is present, prepare to swap legacy CS1-M or DS1-M sensors for CMSG, DMSG, or EMSG switches.
For sizing flexibility, stepping down to a 25 mm bore yields 245 N of push force at 0.5 MPa, while stepping up to a 40 mm bore provides 628 N. At 400 mm of stroke, the 12 mm rod is highly susceptible to side-load bending; you must use an external guide rail to support the load. The fixed rubber bumper softens end-of-stroke impact but does not lock the rod, so add a pilot-operated check valve if you need to hold a load during air loss. For adjustable air cushioning, upgrade to the MBLC series.
Upgrade checklist
- ✓ Order the MBL32X400-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X400-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA FAQ
Yes, the MAL32X400-S-CA is discontinued. The exact drop-in replacement is the MBL32X400-S-CA, matching the 32 mm bore, 400 mm stroke, G1/8 port, CA pivot cover, and magnet. You must upgrade your position sensors, as the legacy CS1-M and DS1-M switches are replaced by CMSG, DMSG, or EMSG models on the MBL.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The cylinder operates at 0.1-1.0 MPa with a speed range of 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X400-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X400-S-CA → MBL32X400-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X400-S-CA replacement with price, stock and lead time, usually within 7-8 hours.