This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X42CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X42CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 42mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X42CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke42 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X42CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA
The AirTAC MAL32X42CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 42mm stroke. It delivers 402N push and 346N pull at 0.5MPa using a G1/8 port. AirTAC replaced this legacy unit with the MBL32X42CA, a drop-in alternative retaining the exact bore, stroke, force, port size, and CA mounting interface.
This SKU features a CA pivot clevis back cover designed to swing on a pin for arcing loads. Unlike the riveted rolling-packed body of the current MBL, the MAL uses threaded front and back covers. Because this specific configuration lacks the -S magnet option, it cannot accept a CS1-M or DS1-M position sensor. The carbon-steel rod has a 20um hard chrome plating guided by a self-lubricating bearing.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X42CA |
| Bore size | Ø32 mm |
| Stroke | 42 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X42CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X42CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×42 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA Is Used
Packaging diverter arm
Swings a 42mm stroke gate to sort small cartons on a packaging line, utilizing the 402N push force and CA pivot clevis to accommodate the arcing motion.
PCB test fixture
Drives a 32mm bore probe head to contact populated circuit boards, relying on the self-lubricating bearing guide to prevent rod binding in tight electronics assembly spaces.
Textile loom stop
Actuates a 42mm stroke stopper pin on a weaving machine, where the fixed rubber bumper absorbs the repetitive end-of-stroke impact at high cycle rates.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA with MBL32X42CA
To replace the MAL32X42CA, order the MBL32X42CA. Confirm the 32mm bore, 42mm stroke, G1/8 port, PT thread form, and CA pivot back cover are retained. If your machine needs end-of-stroke sensing, note this non-S SKU cannot support a sensor; you must specify an MBL32X42CAS and upgrade to the current CMSG, DMSG, or EMSG switches. If you need adjustable air cushioning rather than the fixed rubber bumper, step up to the MBLC32 series. For sizing flexibility, the 25mm bore neighbor provides 245N push at 0.5MPa, while the 40mm bore neighbor offers 628N. Remember the rubber bumper softens impact but does not lock the rod; a plain cylinder drifts when air is lost, so use an external rod lock for held loads.
Upgrade checklist
- ✓ Order the MBL32X42CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X42CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA FAQ
Yes, the MAL32X42CA is discontinued. The exact drop-in replacement is the MBL32X42CA, which matches the 32mm bore, 42mm stroke, 402N force, G1/8 port, and CA pivot mount. The MBL upgrades the body to a riveted rolling-packed design.
At 0.5MPa it provides 402N push and 346N pull force, 563N push at 0.7MPa, and a maximum theoretical force of 82kgf at 1.0MPa. Because this specific SKU lacks the -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X42CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X42CA → MBL32X42CA)
Tell us the quantity and destination — we quote the drop-in MBL32X42CA replacement with price, stock and lead time, usually within 7-8 hours.