This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X435SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X435SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 435mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X435SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke435 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X435SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA
The AirTAC MAL32X435SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 435mm stroke. It delivers 402N of push force and 346N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X435SCA, a drop-in upgrade retaining the exact same bore, stroke, port size, and mounting interface.
This specific SKU includes a built-in magnet (-S) for position sensing and a CA pivot back cover. On the MAL, the -S magnet pairs with legacy CS1-M or DS1-M reed switches, whereas the modern MBL replacement utilizes the current CMSG, DMSG, or EMSG sensor families. Furthermore, the original MAL features threaded front and back covers, while the MBL upgrade employs a riveted rolling-packed body for enhanced structural integrity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X435SCA |
| Bore size | Ø32 mm |
| Stroke | 435 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X435SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X435SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×435 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA Is Used
Pallet Transfer Gate
Actuates a diverter arm on a packaging conveyor, utilizing the 402N push force at 0.5 MPa to redirect heavy cartons while the CA pivot absorbs arcing rod stress.
Vertical Lift Station
Raises a small parts elevator tray through a 435mm travel distance, requiring the CS1-M sensor to signal the top position to the PLC.
Textile Guiding Arm
Pivots a fabric guide mechanism on a knitting machine, where the self-lubricating front-cover bearing handles continuous high-speed oscillation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA with MBL32X435SCA
To replace the MAL32X435SCA, order the MBL32X435SCA. Confirm your 32mm bore, 435mm stroke, G1/8 port, PT thread, CA pivot back cover, and -S magnet are specified. Because this is a 435mm stroke, the 12mm rod is highly susceptible to bending under side loads; you must use the CA pivot mounting to absorb arcing moments or employ an external guide rail. If you need to step down, the 25mm bore offers 245N push at 0.5 MPa; if you need more force, the 40mm bore provides 628N. Note that the fixed rubber bumper softens end-of-stroke impact but does not lock the rod if air pressure drops. If an adjustable cushion is required for this long stroke, step up to the MBLC version on the current line.
Upgrade checklist
- ✓ Order the MBL32X435SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X435SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA FAQ
Yes, the MAL32X435SCA is discontinued. The exact drop-in replacement is the MBL32X435SCA, which matches the 32mm bore, 435mm stroke, G1/8 port, CA pivot, and -S magnet. The MBL body uses a riveted rolling-packed design instead of threaded covers, and its magnet works with CMSG/DMSG/EMSG switches rather than the older CS1-M/DS1-M sensors.
At 0.5 MPa, the push force is 402N and the pull force is 346N. At 0.7 MPa, the push force is 563N. The maximum theoretical force is 82 kgf at 1.0 MPa. It uses a fixed rubber bumper for end-of-stroke impact absorption; it does not have an adjustable air cushion. If adjustable cushioning is needed, order the current MBLC equivalent.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X435SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X435SCA → MBL32X435SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X435SCA replacement with price, stock and lead time, usually within 7-8 hours.