This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X45CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X45CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X45CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke45 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X45CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA
The AirTAC MAL32X45CA is a discontinued compact double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X45CA, which matches the 32 mm bore, 45 mm stroke, G1/8 port, and CA pivot mounting. The legacy MAL body used threaded front and back covers, whereas the current MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU lacks a built-in magnet, meaning it cannot accept a position sensor. The CA back cover provides a pivot clevis that swings on a pin to absorb arcing loads. Internally, a heterogeneous two-way seal retains grease, and the 12 mm carbon-steel rod features 20 um hard-chrome plating to resist wear. It relies on a fixed rubber bumper, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X45CA |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X45CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X45CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×45 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA Is Used
Pneumatic Gripper Arms
Drives short 45 mm jaw movements on packaging grippers, utilizing the 402 N push force to clamp cardboard cartons securely.
Sorting Diverter
Uses the CA pivot clevis to swing a diverter gate on a sorting line, absorbing the arcing motion without binding.
Parts Ejector
Pushes machined aluminum parts out of a CNC fixture, relying on the self-lubricating bearing guide to handle rapid 45 mm ejection cycles.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA with MBL32X45CA
To replace this discontinued cylinder, order the MBL32X45CA. Confirm your 45 mm stroke, G1/8 port, and PT tapered thread. Because this SKU has no -S magnet, it cannot support a sensor; if you need position detection, step up to an MBL32X45SCA and use the current CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M. The CA pivot mount is essential for arcing movements.
If you need to adjust the force, step down to a 25 mm bore (245 N push at 0.5 MPa) or step up to a 40 mm bore (628 N push at 0.5 MPa). Remember that a plain cylinder drifts when air is lost; the fixed bumper softens end-of-stroke impact but does not lock the load. If you require end-of-stroke deceleration for heavier masses, look at the current MBLC line for adjustable air cushions.
Upgrade checklist
- ✓ Order the MBL32X45CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X45CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X45CA. It provides the same 32 mm bore, 45 mm stroke, G1/8 port, and CA pivot mount. The main upgrade is that the MBL uses a riveted rolling-packed body instead of the threaded covers found on the MAL.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. Note that this specific non-magnet SKU cannot accept CS1-M or DS1-M sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X45CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45CA → MBL32X45CA)
Tell us the quantity and destination — we quote the drop-in MBL32X45CA replacement with price, stock and lead time, usually within 7-8 hours.