This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X45SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X45SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 45mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X45SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke45 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X45SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA
The AirTAC MAL32X45SCA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Generating 402 N of push force at 0.5 MPa, it features a 32 mm bore, a 45 mm stroke, and a CA pivot back cover. AirTAC replaced this legacy unit with the MBL32X45SCA, a drop-in alternative retaining the exact same force, G1/8 port, and mounting interface.
This SKU includes a built-in magnet (-S) for position detection. The original MAL body used threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body. Buyers must note the sensor family change: the MAL -S magnet pairs with legacy CS1-M or DS1-M switches, while the MBL successor requires current CMSG, DMSG, or EMSG sensors. The 12 mm carbon-steel rod is hard-chrome plated and guided by a self-lubricating bearing.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X45SCA |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X45SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X45SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×45 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA Is Used
Textile Loom Guide
Drives a thread guide arm on a textile loom, using the 402 N push force at 0.5 MPa to maintain tension while the CA pivot accommodates the mechanism's slight arcing motion.
PCB Conveyor Diverter
Actuates a small diverter gate on a PCB conveyor, relying on the 45 mm stroke and -S magnet to trigger a CS1-M sensor for board routing confirmation.
Carton Sealing Jaw
Pivots a lightweight sealing jaw on a compact carton erector, where the self-lubricating bearing guide withstands repetitive rapid strokes without external grease.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA with MBL32X45SCA
To replace the MAL32X45SCA, order the MBL32X45SCA, ensuring you keep the CA pivot back cover for arcing loads and the default PT port thread. Because this unit has a -S magnet, plan to upgrade your CS1-M/DS1-M sensors to the CMSG/DMSG/EMSG family used by the MBL. If your application requires adjustable end-cushioning rather than the fixed rubber bumper found here, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25 mm bore drops the push force to 245 N at 0.5 MPa, while stepping up to the 40 mm bore increases it to 628 N. Note that a plain bumper does not hold loads pneumatically; the rod will drift if air pressure is lost, so use an external rod lock for vertical or safety-critical positioning.
Upgrade checklist
- ✓ Order the MBL32X45SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X45SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA FAQ
Yes, the MAL32X45SCA is discontinued. The exact drop-in replacement is the MBL32X45SCA, which matches the 32 mm bore, 45 mm stroke, CA pivot cover, and G1/8 port. You will need to update your position sensors, as the MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M type.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. It uses a 12 mm carbon-steel rod with an M10x1.25 rod-end thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X45SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X45SCA → MBL32X45SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X45SCA replacement with price, stock and lead time, usually within 7-8 hours.