This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X480CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X480CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 480mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X480CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke480 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X480CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM
The AirTAC MAL32X480CM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 480mm stroke. It delivers 402N push and 346N pull at 0.5 MPa. The exact drop-in replacement is the MBL32X480CM, matching the bore, stroke, force, G1/8 port, and CM round-end cover.
This legacy unit features a threaded front and back cover, whereas the MBL upgrade uses a riveted rolling-packed body. Because this specific SKU lacks a -S magnet, it cannot accept a position sensor. The piston relies on a heterogeneous two-way seal that retains grease, paired with a self-lubricating front-cover bearing guide.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X480CM |
| Bore size | Ø32 mm |
| Stroke | 480 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X480CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X480CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×480 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM Is Used
PCB Router Z-Axis
Drives a 480mm vertical plunge on a printed circuit board routing spindle, using the 402N thrust to cleanly pierce the backing material.
Pallet Push-off Arm
Actuates a 480mm stroke to push machined aluminum parts off a tight conveyor belt, relying on the CM round-end to accommodate slight angular misalignment.
Deep-Drawer Ejector
Extends fully into a 480mm deep storage drawer to eject plastic component trays, taking advantage of the compact 32mm round body.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM with MBL32X480CM
To replace the MAL32X480CM, order the MBL32X480CM. Confirm the PT tapered port thread, the CM round-end back cover, and the 480mm stroke. Since this SKU has no -S magnet, no sensor is needed; if you ever require position detection, the MBL family uses CMSG/DMSG/EMSG switches rather than the legacy CS1-M/DS1-M. The MAL uses a fixed rubber bumper; for an adjustable air cushion, step up to the MBLC variant on the current line.
For sizing, stepping down to the 25mm bore yields 245N push at 0.5 MPa, while stepping up to the 40mm bore provides 628N push. At 480mm, the 12mm rod is highly susceptible to bending under side loads—use an external guide rail or a pivot mount. Note that a plain cylinder drifts when air is lost; the bumper softens impact but does not lock the load.
Upgrade checklist
- ✓ Order the MBL32X480CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X480CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM FAQ
Yes, the MAL32X480CM is discontinued. The exact drop-in replacement is the MBL32X480CM, offering the same 32mm bore, 480mm stroke, G1/8 port, and CM round-end mounting. The MBL upgrades the body to a riveted rolling-packed design.
At 0.5 MPa it provides 402N push and 346N pull; at 0.7 MPa it provides 563N push, with a theoretical max of 82 kgf at 1.0 MPa. This specific SKU has no -S magnet, so it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X480CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X480CM → MBL32X480CM)
Tell us the quantity and destination — we quote the drop-in MBL32X480CM replacement with price, stock and lead time, usually within 7-8 hours.