This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X50-CA-H — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X50-CA-H in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X50-CA-H, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X50-CA-H
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H
The AirTAC MAL32X50-CA-H is a discontinued double-acting aluminum mini round cylinder delivering 402 N of push force and 346 N of pull force at 0.5 MPa. It features a 32 mm bore, a 50 mm stroke, and a G1/8 port. AirTAC replaced this legacy unit with the MBL32X50-CA-H, a drop-in upgrade retaining the exact same bore, stroke, output force, port size, and CA pivot mounting for seamless installation.
This SKU uses a CA pivot back cover designed to swing on a pin, accommodating arcing loads without binding. Because this specific model lacks the -S magnet code, it cannot accept a position sensor. The original MAL body relies on threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for equally robust performance.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X50-CA-H |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X50-CA-H carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X50-CA-H produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×50 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H Is Used
Pivot-Arm Component Sorting
Ideal for a sorting diverter that swings on an arc. The CA pivot mount absorbs lateral stress while the 402 N thrust at 0.5 MPa reliably pushes metal parts down a gravity chute.
Packaging Lane Rejecter
Provides the 50 mm stroke needed to knock misaligned cartons off a conveyor belt. The 32 mm bore generates enough push force without requiring a bulky profile cylinder.
PCB Test Fixture Lid
Raises and lowers a testing probe lid on an arcing path. The self-lubricating front-cover bearing guide ensures smooth operation through 50 mm of travel.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H with MBL32X50-CA-H
To replace this discontinued cylinder, order the MBL32X50-CA-H. Verify your 32 mm bore, 50 mm stroke, G1/8 port, and PT tapered thread form. The CA clevis mount must be retained to handle arcing loads. If your machine requires end-of-stroke sensing, note that this original SKU has no magnet; you must step up to an MBL32X50S-CA-H and use the current CMSG / DMSG / EMSG switches, as the older CS1-M / DS1-M sensors are obsolete.
For sizing flexibility, stepping down to a 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628 N push. The fixed rubber bumper on this unit softens end-of-stroke impact but is not an adjustable cushion; if your application demands precise deceleration, specify the current-line MBLC. Furthermore, a plain cylinder does not hold its load when air pressure drops—the rod will drift. For vertical loads, install an external pilot-operated check valve.
Upgrade checklist
- ✓ Order the MBL32X50-CA-H (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X50-CA-H instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H FAQ
Yes, the MAL32X50-CA-H is discontinued. The exact drop-in replacement is the MBL32X50-CA-H, which matches the 32 mm bore, 50 mm stroke, 402 N push force, G1/8 port, and CA pivot mounting. The MBL uses a riveted body instead of threaded covers.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, push is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this SKU lacks the -S magnet, it cannot take a position sensor; a sensing application requires upgrading to an MBL32X50S-CA-H using CMSG / DMSG / EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X50-CA-H replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-CA-H → MBL32X50-CA-H)
Tell us the quantity and destination — we quote the drop-in MBL32X50-CA-H replacement with price, stock and lead time, usually within 7-8 hours.