This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X50-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X50-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X50-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X50-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA
The AirTAC MAL32X50-S-CA is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa using a 12 mm carbon-steel rod with a 20 µm hard chrome plating. The exact drop-in replacement is the MBL32X50-S-CA, which matches the original 32 mm bore, 50 mm stroke, G1/8 port, and CA pivot back cover perfectly.
This legacy SKU features a built-in magnet (-S) designed for older CS1-M and DS1-M reed switches, whereas the modern MBL replacement uses CMSG, DMSG, or EMSG sensors. The original MAL body utilized threaded front and back covers, while the upgraded MBL features a riveted rolling-packed body for enhanced structural integrity. Both iterations rely on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X50-S-CA |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X50-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X50-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×50 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA Is Used
PCB Depaneling Router Gate
Actuates a routing machine safety gate using 402 N of push force at 0.5 MPa, while the CA pivot absorbs bracket misalignment during rapid 50 mm strokes.
Carton Flap Folder
Folds corrugated cardboard flaps on a packaging line where the 346 N pull force at 0.5 MPa easily overcomes hinge resistance, and the self-lubricating bearing guide prevents rod binding.
Connector Insertion Press
Drives an electronic connector insertion head with precise 50 mm travel, relying on the heterogeneous two-way seal to retain grease and maintain consistent 82 kgf peak force.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA with MBL32X50-S-CA
To replace the MAL32X50-S-CA, order the MBL32X50-S-CA. Confirm your 32 mm bore, 50 mm stroke, G1/8 port, PT thread form, and the CA pivot back cover, which allows the cylinder to swing on a pin to accommodate arcing loads. If your application requires an adjustable air cushion instead of a fixed rubber bumper, step up to the current MBLC line. If this cylinder loses air pressure, it will not hold its load and the rod will drift, so an external rod lock or pilot-operated check valve is required for secure positioning.
For sizing flexibility, stepping down to the 25 mm bore reduces your push force to 245 N at 0.5 MPa, while stepping up to the 40 mm bore increases it to 628 N at 0.5 MPa. Because this SKU includes the -S magnet, you must upgrade your legacy CS1-M or DS1-M switches to the CMSG, DMSG, or EMSG family when installing the MBL replacement.
Upgrade checklist
- ✓ Order the MBL32X50-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X50-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA FAQ
Yes, the MAL32X50-S-CA is discontinued. The exact drop-in replacement is the MBL32X50-S-CA, offering the same 32 mm bore, 50 mm stroke, G1/8 port, CA pivot cover, and mounting accessories. You must upgrade your sensors from the older CS1-M or DS1-M switches to the current CMSG, DMSG, or EMSG family.
The 32 mm bore cylinder uses a 12 mm carbon-steel rod with an M10x1.25 rod-end thread. At 0.5 MPa it provides 402 N of push force and 346 N of pull force. At 0.7 MPa the push force is 563 N, and the maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X50-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50-S-CA → MBL32X50-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X50-S-CA replacement with price, stock and lead time, usually within 7-8 hours.