This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X500-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X500-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X500-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X500-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA
The AirTAC MAL32X500-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 500mm stroke. It delivers 402N push and 346N pull at 0.5MPa, using a G1/8 port and an M10x1.25 rod thread. AirTAC replaced this legacy unit with the MBL32X500-S-CA, a drop-in alternative matching the exact bore, stroke, force, port size, and CA pivot mounting.
This SKU includes a built-in magnet (-S) for position sensing; the original MAL works with CS1-M/DS1-M switches, while the MBL successor uses CMSG/DMSG/EMSG sensors. The legacy MAL relies on threaded front and back covers, whereas the MBL features a riveted rolling-packed body. A fixed rubber bumper absorbs end-of-stroke impact, though an adjustable air cushion is only available on the current MBLC line.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X500-S-CA |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X500-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X500-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×500 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA Is Used
Packaging Carton Erector
Provides the 402N push at 0.5MPa needed to fold heavy corrugated cardboard flaps over 500mm, utilizing the CA pivot to tolerate minor misalignment during the arcing motion.
CNC Lathe Door Shuttle
Shifts a safety enclosure 500mm back and forth; the -S magnet enables CS1-M sensors to confirm the door is fully open before the spindle ramps up.
Palletizing Diverter Arm
Swings a lightweight routing gate to redirect small product boxes on a flat-belt line, relying on the bumper to soften the 500mm extension stop without external shocks.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA with MBL32X500-S-CA
To replace the MAL32X500-S-CA, order the MBL32X500-S-CA to retain the 32mm bore, 500mm stroke, G1/8 port, PT thread, and CA pivot back cover. If your application requires less force, step down to the 25mm bore (245N push at 0.5MPa); if you need more power, step up to the 40mm bore (628N push at 0.5MPa). Because this is a 500mm stroke, the 12mm rod is highly susceptible to bending under side loads—use the CA clevis to allow arcing alignment or add an external guide rail. The fixed bumper is not a lock; if air pressure drops, the rod drifts, so add a pilot-operated check valve for position holding. For end-of-stroke deceleration, upgrade to the MBLC.
Upgrade checklist
- ✓ Order the MBL32X500-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X500-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA FAQ
Yes, the MAL32X500-S-CA is discontinued. The exact drop-in replacement is the MBL32X500-S-CA, which matches the 32mm bore, 500mm stroke, CA pivot, and G1/8 port. The MBL uses a riveted body instead of threaded covers, and its -S magnet requires CMSG/DMSG/EMSG sensors instead of the older CS1-M/DS1-M switches.
The 32mm bore uses a 12mm carbon-steel rod with an M10x1.25 end thread. At 0.5MPa it generates 402N push and 346N pull; at 0.7MPa it generates 563N push. The maximum theoretical force is 82kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X500-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CA → MBL32X500-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X500-S-CA replacement with price, stock and lead time, usually within 7-8 hours.