This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X500-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X500-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X500-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X500-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM
The AirTAC MAL32X500-S-CM is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X500-S-CM, a drop-in upgrade retaining the exact 32 mm bore, 500 mm stroke, G1/8 port, and CM round-end mounting interface.
This SKU includes a magnetic piston (-S) for position detection. On the older MAL body, which uses threaded front and back covers, this magnet pairs with legacy CS1-M or DS1-M reed switches. The modern MBL replacement features a riveted rolling-packed body and requires the current CMSG, DMSG, or EMSG sensor families. The 12 mm carbon-steel rod has a 20 um hard-chrome plating, and the front-cover bearing guide is self-lubricating to retain grease via a heterogeneous two-way seal.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X500-S-CM |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X500-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X500-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×500 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM Is Used
Pallet Diverters
Pushes lightweight packaging pallets across a transfer line using 402 N of thrust over a 500 mm span, relying on a pivot mount to absorb angular misalignment.
PCB Panel Ejection
Extends to eject assembled circuit board panels from a testing fixture, using the magnetic piston to trigger a CS1-M sensor at the full 500 mm extension.
Carton Sorting Gates
Actuates diverter gates for small product cartons on a packaging conveyor, where the compact 32 mm aluminum body fits within tight side-frame clearances.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM with MBL32X500-S-CM
To replace the MAL32X500-S-CM, order the MBL32X500-S-CM. Confirm your 12 mm rod-end thread (M10x1.25) and the default PT tapered port thread match your fittings. Because this SKU has the -S magnet, you must upgrade your position sensing to CMSG, DMSG, or EMSG switches—the older CS1-M and DS1-M units will not mount to the new body. If you need to manage end-of-stroke impact, note that the MAL uses a fixed rubber bumper; for an adjustable air cushion, step up to the MBLC series.
At 500 mm of stroke, the 12 mm rod has low side-load tolerance and is prone to bending under lateral forces. Use the CM round-end back cover with a clevis joint to accommodate arcing motion, or add an external guide rail. For sizing flexibility, stepping down to a 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628 N push at 0.5 MPa. Remember that the rubber bumper only softens end-of-stroke impact; it does not hold the load if air pressure drops.
Upgrade checklist
- ✓ Order the MBL32X500-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X500-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM FAQ
Yes, the MAL32X500-S-CM is discontinued. The exact drop-in replacement is the AirTAC MBL32X500-S-CM, which matches the 32 mm bore, 500 mm stroke, G1/8 port, and CM round-end mounting. You must swap your old CS1-M or DS1-M sensors for CMSG, DMSG, or EMSG switches, as the MBL uses a riveted body instead of threaded covers.
Operating at 0.5 MPa, this double-acting cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s, driven by its 12 mm diameter rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X500-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500-S-CM → MBL32X500-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X500-S-CM replacement with price, stock and lead time, usually within 7-8 hours.