This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X500SCALB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X500SCALB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X500SCALB, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X500SCALB
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB
The AirTAC MAL32X500SCALB is a discontinued double-acting aluminum mini round cylinder engineered for compact actuation. Delivering 402 N of push force and 346 N of pull force at 0.5 MPa, it features a 32 mm bore, a 500 mm stroke, and a G1/8 port. This legacy unit includes a built-in magnet (-S), a CA pivot back cover, and an LB foot mounting bracket.
AirTAC replaced this threaded-body cylinder with the MBL32X500SCALB, a drop-in alternative retaining the same force, port, and mounting dimensions. The modern MBL utilizes a riveted rolling-packed body and supports CMSG/DMSG/EMSG sensors, whereas the legacy MAL relies on CS1-M/DS1-M switches. The original MAL uses a fixed rubber bumper and a grease-retaining two-way seal.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X500SCALB |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X500SCALB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X500SCALB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×500 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB Is Used
Textile Loom Guide
Drives a 500 mm yarn guide carriage on a weaving loom, using the 402 N thrust to shift the assembly while the CA pivot absorbs angular misalignment.
Pallet Transfer Pusher
Moves lightweight pallets between adjacent rollers in a packaging line, where the LB foot mount provides a stable base and the 500 mm stroke clears the conveyor width.
Drawer Ejector
Ejects filled component trays from a CNC machining center, relying on the self-lubricating bearing to endure frequent 500 mm extensions without manual greasing.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB with MBL32X500SCALB
To replace the MAL32X500SCALB, order the MBL32X500SCALB and verify your CA pivot bracket and LB foot mount align. Because the -S magnet is present, swap your CS1-M/DS1-M sensors for CMSG/DMSG/EMSG switches. If you need less push force, step down to the 25 mm bore (245 N at 0.5 MPa); if you need more, step up to the 40 mm bore (628 N at 0.5 MPa). At 500 mm stroke, the 12 mm rod is vulnerable to bending under side-loads—use an external guide or the CA clevis to absorb arcing motion. The fixed rubber bumper softens end-of-stroke impact but does not lock the load; add a pilot-operated check valve if position holding is required when air pressure drops. For adjustable end-cushioning, upgrade to the MBLC series.
Upgrade checklist
- ✓ Order the MBL32X500SCALB (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X500SCALB instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB FAQ
Yes, the MAL32X500SCALB is discontinued. The exact drop-in replacement is the MBL32X500SCALB, which matches the 32 mm bore, 500 mm stroke, G1/8 port, LB mount, and CA pivot. You must swap CS1-M/DS1-M sensors for CMSG/DMSG/EMSG switches.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, push force reaches 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X500SCALB replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X500SCALB → MBL32X500SCALB)
Tell us the quantity and destination — we quote the drop-in MBL32X500SCALB replacement with price, stock and lead time, usually within 7-8 hours.