This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X50SCAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X50SCAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X50SCAH, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke50 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X50SCAH
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH
The AirTAC MAL32X50SCAH is a discontinued double-acting aluminum mini round cylinder, delivering a 402 N push force at 0.5 MPa. It features a 32 mm bore, 50 mm stroke, a built-in magnet, and a CA pivot back cover. The exact drop-in replacement is the MBL32X50SCAH, matching the original bore, stroke, output force, G1/8 port, and mounting interface.
This legacy model uses threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body. The included -S magnet on this MAL is designed for older CS1-M or DS1-M reed switches; upgrading to the MBL means transitioning to current CMSG, DMSG, or EMSG sensors. The carbon-steel rod is plated with 20 um hard chrome, running through a self-lubricating front-cover bearing guide.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X50SCAH |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X50SCAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X50SCAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×50 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH Is Used
PCB Depaneling Saw
Pushes a circular saw blade carriage forward to singulate printed circuit boards, utilizing the 402 N thrust and CA pivot to accommodate slight blade entry arcs.
Carton Flap Folder
Actuates a mechanical folding arm on a packaging line to tuck minor flaps, relying on the 50 mm stroke and self-lubricating bearing for millions of rapid cycles.
Bottle Divert Gate
Swings a diverter arm on a bottling conveyor to sort containers, where the CA clevis mount handles the pivoting mass and the 346 N pull force retracts the gate.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH with MBL32X50SCAH
To replace the MAL32X50SCAH, order the MBL32X50SCAH. Confirm the 32 mm bore, 50 mm stroke, PT tapered port thread, CA pivot clevis back cover, and the magnet requirement. If your application needs adjustable end-cushioning instead of the standard fixed rubber bumper, step up to the MBLC variant on the current line. Note that a plain cylinder does not hold a load when air pressure drops; install an external rod lock or pilot-operated check valve if safety requires position holding.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. The 50 mm stroke keeps the 12 mm rod side-load risks low, but the CA pivot bracket is specifically designed to absorb arcing loads along the stroke path.
Upgrade checklist
- ✓ Order the MBL32X50SCAH (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X50SCAH instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH FAQ
Yes, the MAL32X50SCAH is discontinued. The exact drop-in replacement is the MBL32X50SCAH, which offers identical bore, stroke, force, port, and mounting. You will need to upgrade your position sensors, as the older CS1-M / DS1-M switches used on the MAL are replaced by CMSG / DMSG / EMSG switches on the MBL.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. It operates on filtered air at 0.1-1.0 MPa, runs at 30-800 mm/s, and uses a G1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X50SCAH replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X50SCAH → MBL32X50SCAH)
Tell us the quantity and destination — we quote the drop-in MBL32X50SCAH replacement with price, stock and lead time, usually within 7-8 hours.