This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X55CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X55CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X55CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke55 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X55CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA
The AirTAC MAL32X55CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 55mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa. The exact drop-in replacement is the MBL32X55CA, which matches the original bore, stroke, output, G1/8 port, and CA mounting. The legacy MAL body used threaded front and back covers, while the current MBL features a riveted rolling-packed body for equally robust performance.
This specific SKU includes a CA pivot back cover, designed to swing on a pin to absorb arcing loads during movement. It lacks a built-in magnet, meaning it cannot accept a position sensor. Additionally, the piston relies on a heterogeneous two-way seal that retains grease, paired with a self-lubricating front-cover bearing guide to support the Ø12mm carbon-steel rod with 20um hard-chrome plating.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X55CA |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X55CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X55CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×55 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA Is Used
Textile Loom Guide
Pivots a yarn guide arm using the CA clevis to accommodate the swing path, applying 402N of push force at 0.5MPa to tension threads.
Package Sorting Flap
Actuates a diverter gate on a 500mm belt, swinging on the CA pivot to push lightweight cardboard cartons into secondary lanes.
PCB Router Clamp
Secures a printed circuit board panel during routing, using the 55mm stroke to clear the workpiece before the spindle descends.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA with MBL32X55CA
To replace the MAL32X55CA, order the MBL32X55CA. Confirm the 55mm stroke, G1/8 port, PT thread form, and the CA pivot back cover are retained. Because this unit lacks an -S magnet, it cannot support a sensor; if position detection is needed, order an MBL32X55SCA and note that the MBL uses the newer CMSG, DMSG, or EMSG switches rather than the older CS1-M/DS1-M series.
For sizing, if you need less force, step down to the 25mm bore (245N push at 0.5MPa). If you need more power, step up to the 40mm bore (628N push at 0.5MPa). The fixed rubber bumper softens end-of-stroke impact but is not an adjustable cushion; for deceleration control, specify the MBLC variant. A plain cylinder drifts when air is lost, so add an external rod lock for suspended loads.
Upgrade checklist
- ✓ Order the MBL32X55CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X55CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA FAQ
Yes, the MAL32X55CA is discontinued. The exact drop-in replacement is the MBL32X55CA, which offers the same 32mm bore, 55mm stroke, G1/8 port, and CA pivot mounting. The MBL upgrades the body to a riveted rolling-packed design while maintaining identical performance.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force increases to 563N. The maximum theoretical force is 82kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X55CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CA → MBL32X55CA)
Tell us the quantity and destination — we quote the drop-in MBL32X55CA replacement with price, stock and lead time, usually within 7-8 hours.