This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X55CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X55CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X55CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke55 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X55CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM
The AirTAC MAL32X55CM is a discontinued double-acting aluminum mini round cylinder featuring a 32mm bore and 55mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. The exact drop-in replacement is the MBL32X55CM, which matches the original bore, stroke, output force, port size, and mounting accessories for a seamless swap.
This legacy SKU features a CM round-end back cover and includes a fixed rubber bumper to soften end-of-stroke impacts, though it lacks adjustable cushioning available on the current MBLC line. Because this configuration lacks a built-in magnet, it cannot accommodate position sensors. Furthermore, the original MAL utilizes threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body, and the cylinder's heterogeneous two-way seal retains grease for long service life.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X55CM |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X55CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X55CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×55 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM Is Used
PCB Router Clamping
Secures printed circuit boards during routing operations using 402N of push force at 0.5MPa, fitting easily into compact electronics assembly cells.
Carton Flap Folder
Folds small packaging flaps on a continuous conveyor line, utilizing the 55mm stroke to clear the path during product pass-through.
Diagnostic Cartridge Sealing
Presses microfluidic cartridge housings together in lab automation equipment, where the compact 32mm body conserves valuable deck space.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM with MBL32X55CM
To replace the discontinued MAL32X55CM, order the MBL32X55CM. Verify the 32mm bore, 55mm stroke, G1/8 port, and CM round-end back cover. Because this SKU has no magnet, it cannot accept sensors; if position detection is needed, step up to an MBL32X55CMS and note the MBL uses current CMSG/DMSG/EMSG switches rather than the legacy CS1-M/DS1-M family. If your load requires less force, the 25mm bore neighbor offers 245N push at 0.5MPa; if more force is needed, the 40mm bore provides 628N push. Remember that a plain bumper does not hold the load if air pressure drops; for position holding, use an external rod lock or pilot-operated check valve. If adjustable end-cushioning is required, look to the MBLC variant.
Upgrade checklist
- ✓ Order the MBL32X55CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X55CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM FAQ
Yes, the AirTAC MAL32X55CM is discontinued. The exact drop-in replacement is the MBL32X55CM, which shares the same 32mm bore, 55mm stroke, G1/8 port, and CM round-end mounting for a direct physical swap.
The 32mm bore utilizes a G1/8 port and an M10x1.25 rod thread. At 0.5MPa it provides 402N push and 346N pull force; at 0.7MPa it provides 563N push, with a maximum theoretical force of 82 kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X55CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X55CM → MBL32X55CM)
Tell us the quantity and destination — we quote the drop-in MBL32X55CM replacement with price, stock and lead time, usually within 7-8 hours.