This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X585SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X585SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 585mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X585SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke585 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X585SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA
The AirTAC MAL32X585SCA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 585 mm stroke. Because 585 mm exceeds the 500 mm standard limit, this is a made-to-order non-standard stroke. It delivers 402 N push and 346 N pull at 0.5 MPa. AirTAC replaced the MAL series with the MBL line, making MBL32X585SCA the exact drop-in replacement sharing the same force, G1/8 port, and CA pivot mount.
This legacy unit features a built-in magnet (-S) for position detection and a CA clevis back cover designed to articulate on a pin for arcing loads. The original MAL body uses threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body. Furthermore, the -S magnet on this MAL pairs with older CS1-M or DS1-M reed switches, while the MBL successor transitions to the current CMSG, DMSG, or EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X585SCA |
| Bore size | Ø32 mm |
| Stroke | 585 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X585SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X585SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×585 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA Is Used
Pouch Packaging Diverter
Uses the 402 N push at 0.5 MPa and 585 mm reach to deflect filled pouches on a packaging line, with the CA pivot absorbing the angular motion of the transfer arm.
Textile Loom Tentering
Extends the fabric width guide across a 585 mm span, relying on the self-lubricating front-cover bearing to maintain smooth operation in a lint-heavy environment.
Warehouse Carton Pusher
Pushes corrugated cartons from a roller accumulation zone, where the fixed rubber bumper softens the end-of-stroke impact to prevent box crushing.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA with MBL32X585SCA
To replace this discontinued cylinder, order the MBL32X585SCA. Confirm your 32 mm bore, 585 mm non-standard stroke, G1/8 port, and PT thread form are correct. The CA pivot back cover on this unit swings on a pin to absorb arcing side-loads, which is critical for a 585 mm stroke. If your application requires adjustable end-cushioning to absorb kinetic energy, step up to the MBLC variant, as the MAL only has a fixed rubber bumper. Note that a plain cylinder drifts when air is lost; use an external rod lock for position holding.
For sizing flexibility, you can step down to the 25 mm bore (providing 245 N push at 0.5 MPa) if the load is lighter, or step up to the 40 mm bore (delivering 628 N push at 0.5 MPa) for heavier work. Because 585 mm is a long stroke for a Ø12 mm rod, side-load tolerance is low; ensure external guiding is present to prevent rod bending.
Upgrade checklist
- ✓ Order the MBL32X585SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X585SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA FAQ
Yes, the MAL32X585SCA is discontinued. The exact drop-in replacement is the MBL32X585SCA, which matches the 32 mm bore, 585 mm stroke, G1/8 port, and CA pivot mounting. The MBL uses a riveted body instead of threaded covers, and if you use the -S magnet, you must upgrade from the old CS1-M / DS1-M switches to the CMSG / DMSG / EMSG sensors.
The 32 mm bore provides a push force of 402 N and a pull force of 346 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X585SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X585SCA → MBL32X585SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X585SCA replacement with price, stock and lead time, usually within 7-8 hours.