This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X5CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X5CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 5mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X5CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke5 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X5CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM
The AirTAC MAL32X5CM is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 5mm stroke. It delivers 402N of push force at 0.5MPa using a G1/8 port. AirTAC replaced this legacy unit with the MBL32X5CM, a drop-in alternative retaining the exact bore, stroke, output force, port size, and CM round-end mounting.
Unlike the MAL’s threaded front and back covers, the MBL upgrade features a riveted rolling-packed body for equivalent durability. This specific SKU lacks a -S magnet, meaning it cannot support a position sensor. Additionally, the original MAL’s fixed rubber bumper cannot lock the load if air pressure drops; you must use an external rod lock for position holding.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X5CM |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X5CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X5CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×5 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM Is Used
Micro-ejector stroke
Ideal for a 5mm micro-ejector stroke in PCB routing machines, providing 402N of push force at 0.5MPa to cleanly snap small vacuum gates without overshoot.
Parts diverter gate
Serves as a compact parts diverter gate in vibratory bowl feeder bowls, using the CM round-end pivot to absorb slight misalignment during rapid 5mm actuation.
Connector insertion press
Drives a connector insertion press in semiconductor test handlers, where the short stroke and fixed rubber bumper safely absorb the 346N pull force at 0.5MPa.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM with MBL32X5CM
To replace the MAL32X5CM, order the MBL32X5CM and verify your CM round-end back cover and PT port thread. If you need a position sensor, you must upgrade to an -S magnet model, which changes the switch family from the legacy CS1-M/DS1-M to the modern CMSG/DMSG/EMSG. If a cushion is required for end-of-stroke deceleration, step up to the MBLC series, as the MAL only has a fixed rubber bumper. For sizing flexibility, stepping down to the 25mm bore yields 245N push force at 0.5MPa, while stepping up to the 40mm bore provides 628N. Because the 5mm stroke is extremely short, side-load bending is minimal, but the 12mm carbon-steel rod still has low side-load tolerance if subjected to arcing CM pivot loads.
Upgrade checklist
- ✓ Order the MBL32X5CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X5CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM FAQ
Yes, the AirTAC MAL32X5CM is discontinued. The exact drop-in replacement is the MBL32X5CM, which matches the 32mm bore, 5mm stroke, G1/8 port, and CM round-end mounting. The MBL uses a riveted rolling-packed body instead of the MAL's threaded covers.
The 32mm bore double-acting cylinder provides 402N push and 346N pull force at 0.5MPa, and 563N push at 0.7MPa. The maximum theoretical force is 82kgf at 1.0MPa. It lacks a -S magnet, so it cannot take a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X5CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X5CM → MBL32X5CM)
Tell us the quantity and destination — we quote the drop-in MBL32X5CM replacement with price, stock and lead time, usually within 7-8 hours.