This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X600-U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X600-U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X600-U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X600-U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U
The AirTAC MAL32X600-U is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and a 600 mm stroke. Because 600 mm exceeds the 500 mm standard limit, this is a non-standard, made-to-order configuration. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X600-U, which matches the original bore, stroke, output force, G1/8 port, and flat-end back cover.
This legacy unit features a U-type flat-end back cover for rigid rear mounting and uses a fixed rubber bumper rather than an adjustable air cushion. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body. Since this specific SKU lacks an S designation, it has no internal magnet and cannot support position sensing.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X600-U |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X600-U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X600-U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×600 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U Is Used
Long-Reach Divert Gate
Actuates a routing flap over a 600 mm wide packaging belt, using the 402 N push force at 0.5 MPa to overcome flap friction and redirect cartons.
Vertical Elevator Stage
Drives a light materials lift platform through a 600 mm vertical travel path, relying on the U-type flat-end cover for rigid, non-articulating frame mounting.
Deep-Drawer Ejection
Pushes component trays out of a 600 mm deep storage magazine, requiring the full stroke length to fully clear the cabinet opening.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U with MBL32X600-U
To replace this discontinued cylinder, order the MBL32X600-U. Confirm your port thread form (this SKU uses default PT tapered), the 32 mm bore, and the U-type flat-end back cover. Because this SKU lacks a magnet, it cannot accept a sensor; if you need position detection, step up to an MBL32X600S-U and use the current CMSG, DMSG, or EMSG switches instead of the legacy CS1-M or DS1-M. If a cushion is required for the end-of-stroke impact, look at the MBLC series, as the MAL only has a fixed rubber bumper.
For sizing flexibility, you can step down to a 25 mm bore (providing 245 N push at 0.5 MPa) if the load is lighter, or step up to a 40 mm bore (providing 628 N push at 0.5 MPa) for heavier resistance. Because the stroke is 600 mm, the 12 mm carbon-steel rod has a high risk of bending under side loads; use an external guide rail or a pivot mounting setup to prevent rod damage. Note that a plain cylinder does not hold its position when air pressure is lost.
Upgrade checklist
- ✓ Order the MBL32X600-U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X600-U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X600-U. It offers the same 32 mm bore, 600 mm stroke, G1/8 port, and flat-end back cover. The modern MBL uses a riveted rolling-packed body instead of the threaded covers found on the MAL.
At 0.5 MPa it provides 402 N push and 346 N pull force; at 0.7 MPa it provides 563 N push, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks the S magnet option, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X600-U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X600-U → MBL32X600-U)
Tell us the quantity and destination — we quote the drop-in MBL32X600-U replacement with price, stock and lead time, usually within 7-8 hours.