This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X60SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X60SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X60SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X60SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM
The AirTAC MAL32X60SCM is a discontinued double-acting aluminum mini round cylinder, delivering 402 N of push force at 0.5 MPa across its 60 mm stroke. It features a 32 mm bore, a G1/8 port, a Ø12 mm carbon-steel rod with 20 um hard chrome plating, and a CM round-end back cover. The exact drop-in replacement is the MBL32X60SCM, matching the original bore, stroke, output force, port size, and mounting interface.
This specific SKU includes a built-in magnet (-S) for position detection; the legacy MAL works with CS1-M / DS1-M switches, while the modern MBL replacement uses CMSG / DMSG / EMSG sensors. A key upgrade in the MBL is the riveted rolling-packed body, which replaces the threaded front and back covers found on this discontinued MAL. The cylinder relies on a fixed rubber bumper to soften end-of-stroke impacts and uses a heterogeneous two-way seal that retains grease for long service life.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X60SCM |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X60SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X60SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM Is Used
PCB Router Gate
Actuates a routing gate on a printed circuit board depaneling machine, using the 402 N push force at 0.5 MPa to reliably shift the 60 mm stroke diverter.
Carton Flap Folder
Folds secondary packaging flaps on a small carton erecting line, where the compact 32 mm aluminum body fits neatly within tight conveyor side-rails.
Diagnostic Cartridge Ejector
Pushes completed microfluidic cartridges out of a testing fixture, depending on the CM round-end back cover to accommodate slight axial misalignment.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM with MBL32X60SCM
To replace the MAL32X60SCM, order the MBL32X60SCM and verify your 32 mm bore, 60 mm stroke, G1/8 port, and CM round-end back cover. Because this SKU has the -S magnet, plan to upgrade your position sensors from the older CS1-M / DS1-M family to the current CMSG / DMSG / EMSG switches used on the MBL. The standard PT tapered port thread remains unchanged. If your application requires an adjustable air cushion rather than the fixed rubber bumper found on this MAL, step up to the MBLC variant on the current line.
For sizing flexibility, you can step down to the 25 mm bore (offering 245 N push at 0.5 MPa) if your load is lighter, or step up to the 40 mm bore (providing 628 N push at 0.5 MPa) for heavier demands. Remember that a plain cylinder does not hold its position when air pressure is lost; the rod will drift, so use an external rod lock or pilot-operated check valve for strict load holding.
Upgrade checklist
- ✓ Order the MBL32X60SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X60SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM FAQ
Yes, the MAL32X60SCM is discontinued. The exact drop-in replacement is the MBL32X60SCM, which matches the 32 mm bore, 60 mm stroke, 402 N force, G1/8 port, and CM round-end cover. The MBL upgrades the body to a riveted rolling-packed design and requires CMSG / DMSG / EMSG sensors instead of the older CS1-M / DS1-M switches.
The MAL32X60SCM operates at speeds of 30-800 mm/s. At 0.5 MPa it provides 402 N push and 346 N pull force; at 0.7 MPa it provides 563 N push. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X60SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X60SCM → MBL32X60SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X60SCM replacement with price, stock and lead time, usually within 7-8 hours.