This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X650SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X650SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X650SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke650 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X650SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM
The AirTAC MAL32X650SCM is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, operating on a 32 mm bore with a 650 mm stroke. Because this stroke exceeds the 500 mm standard limit, it was produced as a made-to-order item. AirTAC replaced this legacy unit with the MBL32X650SCM, a drop-in alternative retaining the exact same bore, stroke, output force, G1/8 port, and mounting footprint.
This specific SKU includes a built-in magnet (-S) and a CM round-end back cover. The original MAL body utilized threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for equally robust performance. Furthermore, the -S magnet on this discontinued model interfaces with legacy CS1-M or DS1-M switches; upgrading to the MBL requires migrating to the current CMSG, DMSG, or EMSG sensor family.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X650SCM |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X650SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X650SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×650 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM Is Used
Textile Loom Tentering
Drives the tentering frame guide on a weaving loom, using the 402 N push at 0.5 MPa to maintain fabric edge tension across a 650 mm reach.
Pallet Chain Diverter
Actuates a sorting arm on a packaging conveyor, pushing heavy corrugated cartons laterally with 563 N of force at 0.7 MPa.
PCB Screening Squeegee
Moves the squeegee assembly on a solder paste printer, relying on the 650 mm stroke to clear the wide print bed for stencil access.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM with MBL32X650SCM
To replace the MAL32X650SCM, order the MBL32X650SCM. Confirm your 32 mm bore, 650 mm non-standard stroke, PT thread, and CM round-end back cover are correct. Because this unit has an -S magnet, note that your existing CS1-M or DS1-M switches must be swapped for CMSG, DMSG, or EMSG sensors to fit the MBL. If you need to adjust force, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa.
At 650 mm of travel, the 12 mm rod is highly susceptible to bending under lateral stress; an external guide rail or a pivot mount is strongly recommended to prevent premature seal failure. Remember that the fixed rubber bumper softens end-of-stroke impacts but is not an adjustable cushion (look to the MBLC for that) and will not hold the load if air pressure drops. For position holding, install an external pilot-operated check valve.
Upgrade checklist
- ✓ Order the MBL32X650SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X650SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM FAQ
Yes, the MAL32X650SCM is discontinued. The exact drop-in replacement is the MBL32X650SCM, which matches the 32 mm bore, 650 mm stroke, G1/8 port, CM round-end, and mounting accessories. You must update your sensors, as the MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
The 32 mm bore generates 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. It features a 12 mm rod, an M10x1.25 rod-end thread, a G1/8 port, and operates at 30-800 mm/s over a 0.1-1.0 MPa pressure range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X650SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650SCM → MBL32X650SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X650SCM replacement with price, stock and lead time, usually within 7-8 hours.