This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X650U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X650U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X650U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke650 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X650U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U
The AirTAC MAL32X650U is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and a 650 mm stroke. Because 650 mm exceeds the 500 mm standard limit, this unit was produced as a made-to-order item. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, operating on a G1/8 port with a Ø12 mm carbon-steel rod. The exact drop-in replacement is the MBL32X650U, which matches the original bore, stroke, output force, port size, and flat-end rear cover.
This legacy MAL unit features threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body for equivalent durability. The original MAL design relies on a fixed rubber bumper to soften end-of-stroke impacts and does not offer adjustable cushioning; if your 650 mm stroke requires precise end-deceleration, the current MBLC variant provides an adjustable air cushion. Additionally, this specific SKU lacks a built-in magnet (-S), meaning it cannot support position sensing.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X650U |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X650U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X650U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×650 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U Is Used
Textile Beam Loom Feeder
Drives a 650 mm reach to position yarn beams in tight weaving looms, utilizing the 402 N push force to shift heavy spools without an oversized profile body.
Pallet Transfer Pusher
Executes long-stroke part ejection between conveyor belts in packaging lines, where the compact 32 mm barrel saves space while moving 346 N pull loads.
Warehouse Tray Sorter
Performs extended diverting of inventory trays at logistics hubs, requiring the full 650 mm travel to reach across divergent roller lanes.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U with MBL32X650U
To replace the MAL32X650U, order the MBL32X650U. Verify your installation requires the U flat-end back cover for rigid mounting and the default PT tapered port thread. Because this SKU lacks the -S magnet, you cannot mount a CS1-M or DS1-M sensor on the old unit, and the MBL equivalent would similarly need a non-magnet configuration unless you actively upgrade to an -S version (which then requires the newer CMSG/DMSG/EMSG switches on the MBL body).
When sizing, you can step down to the 25 mm bore (offering 245 N push at 0.5 MPa) for lighter loads, or step up to the 40 mm bore (providing 628 N push at 0.5 MPa) for higher force. At 650 mm, the 12 mm rod is highly susceptible to bending under side-loads; you must use an external guide rail or a pivot mount to prevent premature seal failure. Note that a plain cylinder drifts when air is lost—the bumper is not a lock, so add an external rod lock for vertical loads.
Upgrade checklist
- ✓ Order the MBL32X650U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X650U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U FAQ
Yes, the MAL series is discontinued. The exact drop-in replacement is the MBL32X650U, offering the same 32 mm bore, 650 mm stroke, G1/8 port, and flat-end U cover. The MBL upgrades the body to a riveted rolling-packed design while retaining the 82 kgf maximum force.
At 0.5 MPa, it provides 402 N push and 346 N pull; at 0.7 MPa it provides 563 N push, with a theoretical max of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X650U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X650U → MBL32X650U)
Tell us the quantity and destination — we quote the drop-in MBL32X650U replacement with price, stock and lead time, usually within 7-8 hours.