This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X6CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X6CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 6mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X6CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke6 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X6CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA
The AirTAC MAL32X6CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 6mm stroke, delivering 402N of push force at 0.5MPa. It features a CA pivot back cover designed to swing on a pin for arcing motion. As a legacy unit, its direct drop-in replacement is the MBL32X6CA, which matches the original bore, stroke, force, G1/8 port, and mounting footprint exactly.
This specific SKU lacks a built-in magnet (-S), meaning it cannot support position sensors like the older CS1-M or DS1-M switches. The original MAL body used threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for enhanced structural integrity. Both iterations rely on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion; if end-of-stroke deceleration control is required, the current-line MBLC series is the recommended upgrade.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X6CA |
| Bore size | Ø32 mm |
| Stroke | 6 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X6CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X6CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×6 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA Is Used
Valve Gate Mechanism
Drives the short 6mm stroke to open and close small pneumatic valve gates in fluid processing lines, utilizing the 402N push force to overcome internal fluid pressure.
PCB Component Press
Depresses delicate surface-mount connectors onto printed circuit boards, relying on the fixed rubber bumper to prevent impact damage during the rapid 6mm travel.
Package Diverter Arm
Actuates a short pivot arm to nudge lightweight packages on a conveyor belt, taking advantage of the CA clevis mount to accommodate the arc of the swinging arm.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA with MBL32X6CA
To replace the MAL32X6CA, order the MBL32X6CA, ensuring you match the 32mm bore, 6mm stroke, PT tapered port thread, and CA pivot back cover. Because this SKU has no magnet, you cannot track rod position; adding an -S to the MBL order enables sensing but requires upgrading to modern CMSG, DMSG, or EMSG switches instead of the legacy CS1-M/DS1-M.
For sizing flexibility, stepping down to the 25mm bore yields 245N push force at 0.5MPa, while stepping up to the 40mm bore provides 628N. Note that this cylinder uses a fixed rubber bumper, not a lock; it cannot hold a load if air pressure drops, so an external rod lock is needed for fail-safe holding. The 6mm stroke is extremely short, so side-load risks are minimal, but the 12mm carbon-steel rod with 20um hard chrome plating still relies on the self-lubricating front-cover bearing guide to maintain alignment.
Upgrade checklist
- ✓ Order the MBL32X6CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X6CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA FAQ
Yes, the MAL32X6CA is discontinued. The exact drop-in replacement is the MBL32X6CA, offering the same 32mm bore, 6mm stroke, CA pivot cover, G1/8 port, and 402N force. The MBL uses a riveted rolling-packed body instead of the older threaded covers.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force is 563N. The maximum theoretical force is 82kgf at 1.0MPa. This specific SKU lacks a magnet, so it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X6CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X6CA → MBL32X6CA)
Tell us the quantity and destination — we quote the drop-in MBL32X6CA replacement with price, stock and lead time, usually within 7-8 hours.