This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X750-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X750-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X750-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X750-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA
The AirTAC MAL32X750-CA is a discontinued double-acting aluminum mini round cylinder engineered for a 32 mm bore and a 750 mm stroke. Because 750 mm exceeds the 500 mm standard limit, this unit was produced as a made-to-order stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced the legacy MAL line with the MBL series, making the MBL32X750-CA the exact drop-in replacement. It matches the original bore, stroke, output force, G1/8 port, and CA mounting configuration perfectly.
The legacy MAL body uses threaded front and back covers, whereas the modern MBL features a riveted rolling-packed body for equally robust performance. This specific SKU lacks a -S magnet, meaning it cannot support a position sensor. Additionally, the fixed rubber bumper softens end-of-stroke impacts but does not function as an adjustable air cushion; for shock absorption on long strokes, the current-line MBLC offers that adjustable option. The piston relies on a heterogeneous two-way seal that retains grease, and the carbon-steel rod has a 20 um hard-chrome plating to resist wear.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X750-CA |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X750-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X750-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×750 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA Is Used
Textile Loom Tensioning
Provides 402 N of push at 0.5 MPa to swing the CA pivot bracket, guiding heavy fabric webs through a 750 mm loom stroke without lateral binding.
Pallet Transfer Arm
Uses the full 750 mm reach to push standard pallets between conveyor lanes, relying on the self-lubricating bearing to handle the extended rod extension cycle.
Vertical Lift Gate
Raises a parts-diverter gate in a packaging line, where the fixed rubber bumper safely absorbs the kinetic energy of the 32 mm bore at the end of its 750 mm travel.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA with MBL32X750-CA
To replace the MAL32X750-CA, order the MBL32X750-CA, ensuring you match the PT thread form, CA pivot back cover, and non-magnet setup. Since this SKU has no -S magnet, it cannot accept a sensor; if you ever need position detection, you must upgrade to an -S model and switch from the older CS1-M / DS1-M switches to the modern CMSG / DMSG / EMSG family used on the MBL. If you need to step down force, the 25 mm bore provides 245 N push at 0.5 MPa; stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. Because the 750 mm stroke is non-standard, verify manufacturing lead times. A plain bumper does not hold position if air pressure drops, so install a pilot-operated check valve if drifting is a concern. At 750 mm, the 12 mm rod is highly susceptible to bending; the CA clevis is essential to absorb arcing side-loads, but you should still use an external guide rail to prevent rod damage.
Upgrade checklist
- ✓ Order the MBL32X750-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X750-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA FAQ
Yes, the MAL32X750-CA is discontinued. The exact drop-in replacement is the MBL32X750-CA, which matches the 32 mm bore, 750 mm stroke, G1/8 port, and CA pivot mounting. You can install it directly into your existing setup.
At 0.5 MPa, it pushes with 402 N and pulls with 346 N; at 0.7 MPa it pushes 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X750-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-CA → MBL32X750-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X750-CA replacement with price, stock and lead time, usually within 7-8 hours.