This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X750-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X750-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X750-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X750-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA
The AirTAC MAL32X750-S-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 750mm stroke. Because 750mm exceeds the 500mm standard limit, this is a made-to-order non-standard stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa. AirTAC replaced the MAL line with the MBL series, making the exact drop-in replacement the MBL32X750-S-CA, which matches the bore, stroke, force, G1/8 port, and CA pivot mounting.
This legacy SKU features a built-in magnet (-S) designed for older CS1-M or DS1-M reed switches; upgrading to the MBL requires switching to current CMSG, DMSG, or EMSG sensors. The original MAL body uses threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body for structural integrity. Both designs rely on a fixed rubber bumper at the stroke ends rather than an adjustable air cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X750-S-CA |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X750-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X750-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×750 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA Is Used
Pouch Packaging Diverter
Actuates a pivoting gate to route sealed pouches on a packaging line, utilizing the 750mm stroke to clear a wide conveyor belt while providing 402N of push force at 0.5MPa.
Textile Loom Beam Index
Shifts heavy fabric beams laterally across a loom frame, where the CA pivot clevis absorbs angular misalignment during the long 750mm extension cycle.
Warehouse Vertical Tray Lift
Raises lightweight storage trays to upper tiers in automated retrieval systems, depending on the magnet for upper-limit detection via a CS1-M switch.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA with MBL32X750-S-CA
To replace this MAL32X750-S-CA, order the MBL32X750-S-CA. Confirm your 32mm bore, 750mm non-standard stroke, G1/8 port, PT thread form, and the CA pivot back cover. Because this SKU includes the -S magnet, you must update your position sensing to the MBL-compatible CMSG, DMSG, or EMSG switches, as the older CS1-M and DS1-M sensors will not mount correctly. If your application requires end-of-stroke deceleration, step up to the MBLC variant which adds an adjustable air cushion absent on the MAL.
When sizing, verify if 32mm is optimal. Stepping down to the 25mm bore yields 245N push at 0.5MPa, while stepping up to the 40mm bore provides 628N push at 0.5MPa. A 750mm stroke on a 12mm rod demands strict alignment; the CA clevis pivot accommodates arcing loads, but you should add an external guide to prevent rod bending. Note that the rubber bumper softens impact but does not hold the load if air pressure drops.
Upgrade checklist
- ✓ Order the MBL32X750-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X750-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA FAQ
Yes, the MAL32X750-S-CA is discontinued. The exact drop-in replacement is the MBL32X750-S-CA, offering the same 32mm bore, 750mm stroke, G1/8 port, and CA pivot mounting. The MBL uses a riveted body instead of threaded covers, and you must update your -S magnet sensors from the old CS1-M or DS1-M to the new CMSG, DMSG, or EMSG switches.
At 0.5MPa, the 32mm bore provides 402N push and 346N pull force. At 0.7MPa, push increases to 563N, with a theoretical maximum of 82kgf at 1.0MPa. It operates on filtered air at 0.1-1.0MPa, runs at 30-800mm/s, and uses a fixed rubber bumper rather than an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X750-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CA → MBL32X750-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X750-S-CA replacement with price, stock and lead time, usually within 7-8 hours.