This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X750-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X750-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X750-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X750-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM
The AirTAC MAL32X750-S-CM is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and a 750 mm non-standard made-to-order stroke. Delivering 402 N of push force at 0.5 MPa, it features a built-in magnet and a CM round-end back cover. The exact drop-in replacement is the MBL32750-S-CM, which matches the bore, stroke, output force, G1/8 port, and mounting hardware.
A key upgrade in the MBL is the riveted rolling-packed body, replacing the threaded front and back covers found on this legacy MAL. Additionally, the -S magnet on this unit operates with older CS1-M or DS1-M reed switches, while the modern MBL replacement transitions to the current CMSG, DMSG, or EMSG sensor families. The 12 mm carbon-steel rod relies on a heterogeneous two-way seal that retains grease, and the fixed rubber bumper softens end-of-stroke impacts without acting as a position lock.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X750-S-CM |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X750-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X750-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×750 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM Is Used
PCB Conveyor Diversion
Pushes routing gates on a 750 mm travel conveyor for electronics assembly, using the 402 N push force to reliably shift PCB trays without overpowering the lightweight fixtures.
Textile Beam Indexing
Extends to index large yarn beams into a winding machine, where the long stroke accommodates wide material rolls and the CM round-end cover tolerates minor alignment shifts.
Carton Sorting Pusher
Actuates a side-push diverter on a packaging line, moving light cardboard cartons over the 750 mm length while the self-lubricating bearing guide maintains smooth operation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM with MBL32X750-S-CM
To replace this MAL32X750-S-CM, order the MBL32X750-S-CM. Verify your 32 mm bore, 750 mm stroke, G1/8 port, PT thread form, CM round-end cover, and magnet requirement. Because the -S magnet is present, plan to upgrade your CS1-M or DS1-M sensors to CMSG, DMSG, or EMSG switches for the new body. If your application requires adjustable air cushioning rather than the fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. Since the 750 mm stroke is non-standard and exceeds the 500 mm maximum standard length, the 12 mm rod has low side-load tolerance over that distance. Use an external guide rail to prevent rod bending, or pivot the CM round-end cover to accommodate arcing motion. Note that a plain cylinder drifts when air is lost, so add a rod lock or pilot-operated check valve if you need to hold a suspended load.
Upgrade checklist
- ✓ Order the MBL32X750-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X750-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X750-S-CM. It offers the same 32 mm bore, 750 mm stroke, force, G1/8 port, and CM mounting. The main changes are a riveted body instead of threaded covers, and the magnet now uses CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M sensors.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s, operating pressure is 0.1-1.0 MPa, and it uses a fixed rubber bumper rather than an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X750-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X750-S-CM → MBL32X750-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X750-S-CM replacement with price, stock and lead time, usually within 7-8 hours.