This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X75CMY — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X75CMY in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X75CMY, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X75CMY
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY
The AirTAC MAL32X75CMY is a discontinued double-acting aluminum mini round cylinder delivering 402 N push and 346 N pull at 0.5 MPa. It features a 32 mm bore, 75 mm stroke, G1/8 port, and a CM round-end back cover. AirTAC replaced this legacy unit with the MBL32X75CMY, a drop-in upgrade retaining the exact same bore, stroke, output force, port size, and mounting interface.
Because this specific SKU lacks an -S magnet, it cannot accept a position sensor. The original MAL body uses threaded front and back covers, whereas the MBL replacement features a riveted rolling-packed body. Both share a fixed rubber bumper for end-of-stroke damping, but if your application requires adjustable air cushioning, you must step up to the current MBLC variant.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X75CMY |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X75CMY carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X75CMY produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY Is Used
Pivoting Gate Diverter
Drives a 75 mm stroke on a packaging line diverter gate, utilizing the CM round-end to accommodate the arcing motion of the redirecting flap.
Sorting Arm Actuator
Pushes lightweight parcels on a logistics conveyor with 402 N of thrust at 0.5 MPa, providing reliable actuation in tight transfer zones.
Bin Lid Release
Operates a 32 mm bore pivoting lid on a parts dispensing bin, where the round-end back cover handles the swing-out geometry smoothly.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY with MBL32X75CMY
To replace the MAL32X75CMY, order the MBL32X75CMY. Verify your setup accommodates the CM round-end back cover, which is designed for arcing or pivoting rod-end loads rather than rigid linear thrust. If you need to step down to a smaller bore, the 25 mm neighbor provides 245 N push at 0.5 MPa; if you need more force, the 40 mm neighbor provides 628 N push at 0.5 MPa and upgrades the port to G1/4. Remember that a plain bumper does not hold a load if air pressure drops, so use an external rod lock for vertical positioning. If you need adjustable cushioning instead of a fixed rubber bumper, specify the MBLC series.
Upgrade checklist
- ✓ Order the MBL32X75CMY (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X75CMY instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY FAQ
Yes, the MAL32X75CMY is discontinued. The exact drop-in replacement is the MBL32X75CMY, which matches the 32 mm bore, 75 mm stroke, G1/8 port, and CM round-end mounting. The MBL uses a modern riveted rolling-packed body instead of the older threaded covers.
At 0.5 MPa, the push force is 402 N and pull is 346 N. At 0.7 MPa, push is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this SKU lacks an -S magnet, it cannot take a position sensor; the -S versions used CS1-M/DS1-M switches, while the MBL replacement uses CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X75CMY replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X75CMY → MBL32X75CMY)
Tell us the quantity and destination — we quote the drop-in MBL32X75CMY replacement with price, stock and lead time, usually within 7-8 hours.