This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X7CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X7CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 7mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X7CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke7 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X7CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA
The AirTAC MAL32X7CA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Delivering 402N of push force and 346N of pull force at 0.5MPa, it features a 32mm bore, a 7mm stroke, and a G1/8 port. Because this legacy series is end-of-life, the direct drop-in replacement is the MBL32X7CA, which matches the exact bore, stroke, output force, port size, and CA mounting interface.
This specific SKU includes a CA pivot back cover that swings on a pin to accommodate arcing loads, and because it lacks the -S suffix, it cannot accept a position sensor. The original MAL body utilizes threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body for equally robust performance. Internally, the piston relies on a heterogeneous two-way seal that retains grease, complemented by a self-lubricating bearing guide in the front cover.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X7CA |
| Bore size | Ø32 mm |
| Stroke | 7 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X7CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X7CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×7 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA Is Used
Pick-and-Place Ejection
Short 7mm stroke provides rapid 402N ejection of small stamped metal parts out of a progressive die.
PCB Edge Clamping
Secures rigid printed circuit boards during automated soldering, using the 32mm bore's 346N pull force at 0.5MPa.
Diverter Arm Pivot
The CA clevis back cover swings smoothly on a pin to actuate a lightweight routing flap on a packaging conveyor.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA with MBL32X7CA
To replace the MAL32X7CA with the MBL32X7CA, verify your 32mm bore, 7mm stroke, G1/8 port, and default PT tapered thread form. You must also confirm the CA pivot back cover, which allows the cylinder to swing on a pin for arcing movements. Since this SKU has no -S magnet, it cannot support a position sensor; if you need detection, order an MBL32X7CAS and note that the modern MBL uses CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M. The MAL uses a fixed rubber bumper; if you need an adjustable air cushion, step up to the MBLC variant on the current line. For sizing flexibility, stepping down to bore 25 yields 245N push at 0.5MPa, while stepping up to bore 40 provides 628N push at 0.5MPa. A plain MBL does not hold its load when air is lost, so use an external rod lock for suspended masses.
Upgrade checklist
- ✓ Order the MBL32X7CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X7CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA FAQ
Yes, the MAL32X7CA is discontinued. The exact drop-in replacement is the MBL32X7CA, which offers the same 32mm bore, 7mm stroke, G1/8 port, and CA pivot mounting. The modern MBL uses a riveted rolling-packed body instead of the older threaded covers, but maintains identical output force.
At 0.5MPa, the push force is 402N and the pull force is 346N. At 0.7MPa, the push force reaches 563N, with a theoretical maximum of 82kgf at 1.0MPa. Because this specific SKU lacks the -S magnet option, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X7CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X7CA → MBL32X7CA)
Tell us the quantity and destination — we quote the drop-in MBL32X7CA replacement with price, stock and lead time, usually within 7-8 hours.