This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X80-S-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X80-S-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X80-S-CM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X80-S-CM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM
The AirTAC MAL32X80-S-CM is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa through a 32 mm bore and 80 mm stroke. The exact drop-in replacement is the MBL32X80-S-CM, which matches the original bore, stroke, force, G1/8 port, and CM round-end back cover.
This legacy unit includes a -S magnet for position sensing. The original MAL works with older CS1-M or DS1-M reed switches, while the MBL replacement shifts to the modern CMSG, DMSG, or EMSG sensor families. The old MAL body uses threaded front and back covers, whereas the current MBL features a riveted rolling-packed body for equivalent durability. Both generations rely on a fixed rubber bumper to soften stroke ends, not an adjustable cushion.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X80-S-CM |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X80-S-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X80-S-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×80 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM Is Used
PCB Router Ejection
Provides 402 N of push at 0.5 MPa to eject cut printed circuit boards from a depaneling router, fitting cleanly into tight machine cells.
Carton Flap Folding
Uses the 80 mm stroke and CM round-end pivot to fold small corrugated carton flaps, absorbing the impact via the fixed rubber bumper.
Connector Insertion Press
Drives a 32 mm bore actuator to press electronic header connectors into housings, using the -S magnet to confirm seating via a CS1-M switch.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM with MBL32X80-S-CM
To replace the MAL32X80-S-CM, order the MBL32X80-S-CM. Verify your setup needs the 80 mm stroke, the G1/8 port, and the CM round-end back cover. Because this SKU includes the -S magnet, you must upgrade your sensors from the legacy CS1-M or DS1-M to the current CMSG, DMSG, or EMSG switches. If you need adjustable air cushioning at the stroke ends, step up to the MBLC variant on the current line.
For sizing flexibility, stepping down to the 25 mm bore drops the 0.5 MPa push force to 245 N, while stepping up to the 40 mm bore increases it to 628 N. Remember that a plain bumper does not hold a load if air pressure drops; install an external pilot-operated check valve for position holding. At 80 mm stroke, side-load tolerance is manageable, but the 12 mm carbon-steel rod with 20 um hard chrome plating still handles rigid loads best when guided by the self-lubricating front-cover bearing.
Upgrade checklist
- ✓ Order the MBL32X80-S-CM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X80-S-CM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM FAQ
Yes, the MAL32X80-S-CM is discontinued. The exact drop-in replacement is the MBL32X80-S-CM, offering the same 32 mm bore, 80 mm stroke, force, G1/8 port, and CM mounting. You must swap the old CS1-M or DS1-M sensors for CMSG, DMSG, or EMSG switches.
The 32 mm bore generates a push force of 402 N and a pull force of 346 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X80-S-CM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80-S-CM → MBL32X80-S-CM)
Tell us the quantity and destination — we quote the drop-in MBL32X80-S-CM replacement with price, stock and lead time, usually within 7-8 hours.