This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X80CAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X80CAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X80CAH, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X80CAH
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH
The AirTAC MAL32X80CAH is a discontinued double-acting aluminum mini round cylinder delivering 402 N of push force at 0.5 MPa. It features a 32 mm bore, an 80 mm stroke, and a CA pivot back cover designed to swing on a pin for arcing motion. The exact drop-in replacement is the MBL32X80CAH, matching the original bore, stroke, output force, G1/8 port, and mounting interface.
This legacy unit utilizes a heterogeneous two-way seal that retains grease, paired with a self-lubricating front-cover bearing guide. Because this specific SKU lacks the -S magnet code, it cannot accommodate a position sensor. Furthermore, the original MAL relied on threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for enhanced structural integrity.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X80CAH |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X80CAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X80CAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×80 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH Is Used
Textile Loom Beater
Drives the oscillating beater mechanism on a weaving loom, utilizing the CA pivot to accommodate the arcing swing while applying 402 N of push force at 0.5 MPa.
Package Divert Arm
Actuates a pivoting deflector gate on a packaging conveyor, where the 80 mm stroke provides just enough travel to redirect small cartons without occupying excessive machine footprint.
Bottle Sorting Chute
Indexes plastic bottles into a labeling station, relying on the self-lubricating bearing guide to maintain smooth operation despite frequent short-cycle actuation.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH with MBL32X80CAH
To replace the MAL32X80CAH, order the MBL32X80CAH, ensuring you retain the CA pivot back cover and PT thread form. If your application requires a position sensor, you must select an MBL variant with the -S option, which will require upgrading to the current CMSG, DMSG, or EMSG switch family since the older CS1-M and DS1-M sensors are obsolete. The fixed rubber bumper softens end-of-stroke impacts, but if you need adjustable air cushioning, step up to the MBLC series. If sizing force, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N. Remember that a plain cylinder drifts when air is lost, so use an external rod lock for vertical loads.
Upgrade checklist
- ✓ Order the MBL32X80CAH (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X80CAH instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH FAQ
Yes, the AirTAC MAL32X80CAH is discontinued. The exact drop-in replacement is the MBL32X80CAH, which matches the 32 mm bore, 80 mm stroke, CA pivot cover, and G1/8 port. The MBL upgrades the body to a riveted rolling-packed construction.
At 0.5 MPa, it pushes with 402 N and pulls with 346 N. At 0.7 MPa, push force is 563 N, with a maximum theoretical output of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet code, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X80CAH replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X80CAH → MBL32X80CAH)
Tell us the quantity and destination — we quote the drop-in MBL32X80CAH replacement with price, stock and lead time, usually within 7-8 hours.