This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X8CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X8CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 8mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X8CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke8 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X8CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA
The AirTAC MAL32X8CA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Delivering 402 N of push force at 0.5 MPa, it features a 32 mm bore, an 8 mm stroke, and a G1/8 port. AirTAC replaced this legacy unit with the MBL32X8CA, a drop-in alternative that matches the original bore, stroke, output force, port size, and CA pivot mounting for seamless integration.
The legacy MAL body relies on threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed assembly. Because this specific SKU lacks an -S magnet, it cannot support position sensing. Internally, a heterogeneous two-way seal retains grease, and the carbon-steel rod features 20 um hard-chrome plating to resist wear. The fixed rubber bumper absorbs end-of-stroke impact, but it does not function as a locking mechanism.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X8CA |
| Bore size | Ø32 mm |
| Stroke | 8 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X8CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X8CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×8 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA Is Used
PCB Router Gating
Directs circuit boards down an 8 mm path in electronics fabrication, utilizing the 402 N thrust to positively index panels without overshooting the short stroke.
Connector Insertion Press
Pushes ribbon cable connectors into housing slots with a controlled 8 mm motion, relying on the self-lubricating bearing guide to prevent rod binding.
Diverter Arm Kick
Pivots on the CA clevis to arc a small diverter arm, bumping lightweight cartons on a packaging line using the 346 N retract force.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA with MBL32X8CA
To replace the MAL32X8CA, order the MBL32X8CA, ensuring you keep the PT thread, CA pivot back cover, and non-magnet configuration. If your application requires position detection, you must step up to an -S variant and note that the MBL uses the newer CMSG, DMSG, or EMSG switches rather than the older CS1-M/DS1-M sensors. For load holding when air pressure drops, add an external rod lock or pilot-operated check valve, as the rubber bumper will not hold the load. If sizing up or down, the 25 mm bore provides 245 N push at 0.5 MPa, while the 40 mm bore yields 628 N. If adjustable end-cushioning is needed for heavier loads, look to the current MBLC line.
Upgrade checklist
- ✓ Order the MBL32X8CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X8CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA FAQ
Yes, the MAL32X8CA is discontinued. The exact drop-in replacement is the MBL32X8CA, which offers identical bore, stroke, force, G1/8 port, and CA pivot mounting. The main upgrade is that the MBL uses a riveted rolling-packed body instead of the older threaded covers.
At 0.5 MPa, it pushes with 402 N and pulls with 346 N. At 0.7 MPa, push force is 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. Because this specific SKU lacks a magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X8CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X8CA → MBL32X8CA)
Tell us the quantity and destination — we quote the drop-in MBL32X8CA replacement with price, stock and lead time, usually within 7-8 hours.