This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X900-U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X900-U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X900-U, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke900 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X900-U
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U
The AirTAC MAL32X900-U is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and a 900mm stroke. Because 900mm exceeds the 500mm standard maximum, this unit was a made-to-order configuration. It delivers 402N of push force and 346N of pull force at 0.5MPa, utilizing a G1/8 port and an M10x1.25 rod-end thread. The exact drop-in replacement is the MBL32X900-U, matching the bore, stroke, output force, port, and flat-end U back cover.
This legacy MAL unit features threaded front and back covers, whereas the current MBL replacement uses a riveted rolling-packed body for equally robust performance. The U suffix denotes a rigid flat-end rear cover. Since this SKU lacks the -S magnet, it cannot accept a position sensor. The internal piston relies on a heterogeneous two-way seal that retains grease, and the carbon-steel rod features 20um hard-chrome plating to resist wear over the long 900mm travel.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X900-U |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X900-U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X900-U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×900 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U Is Used
Long-travel part ejection
Pushes molded plastic parts out of an injection molding press using 402N of force at 0.5MPa across a 900mm reach, requiring an external guide to prevent rod deflection.
Pallet transfer shuttle
Moves lightweight aluminum pallets between processing stations on a 900mm stroke, relying on the rigid U flat-end rear cover to maintain alignment under high cycle counts.
Deep-bin product sorting
Diverts small consumer electronics packages from a deep storage bin over a 900mm extension, leveraging the self-lubricating front-cover bearing guide to handle the extended travel.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U with MBL32X900-U
To replace the MAL32X900-U, order the MBL32X900-U, ensuring you retain the identical 32mm bore, 900mm stroke, G1/8 port, and U flat-end back cover. If your cycle time requires stepping down to a smaller bore, the 25mm neighbor provides 245N push at 0.5MPa; if you need more force, stepping up to the 40mm bore yields 628N push at 0.5MPa. Because this 900mm stroke exceeds the 500mm standard, expect a non-standard made-to-order lead time. The 12mm rod has low side-load tolerance, so an external guide rail is strongly recommended to prevent rod bending across such a long extension. The MAL uses a fixed rubber bumper, not an adjustable cushion; if end-of-stroke shock is an issue, consider the MBLC variant. A plain cylinder does not hold its load when air is lost, so add an external rod lock for vertical applications.
Upgrade checklist
- ✓ Order the MBL32X900-U (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X900-U instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U FAQ
Yes, the MAL series is discontinued. The exact drop-in replacement is the MBL32X900-U. It matches the 32mm bore, 900mm stroke, G1/8 port, and U flat-end back cover. The newer MBL body uses a riveted rolling-packed design instead of the older threaded covers, but the force and mounting remain identical.
At 0.5MPa it provides 402N push and 346N pull; at 0.7MPa it provides 563N push, with a theoretical maximum of 82kgf at 1.0MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor. If sensing is required, order an MBL32X900-US, which uses the current CMSG, DMSG, or EMSG switch families.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X900-U replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X900-U → MBL32X900-U)
Tell us the quantity and destination — we quote the drop-in MBL32X900-U replacement with price, stock and lead time, usually within 7-8 hours.