This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X90SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X90SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X90SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X90SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA
The AirTAC MAL32X90SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 90mm stroke, delivering 402N of push force at 0.5MPa. The exact drop-in replacement is the MBL32X90SCA, matching the original bore, stroke, force, G1/8 port, and CA pivot mounting. The legacy MAL features a threaded front and back cover assembly, whereas the current MBL utilizes a riveted rolling-packed body for equally robust performance.
This SKU includes a built-in magnet (-S) for position sensing. On the MAL, this magnet interfaces with older CS1-M or DS1-M reed switches, but upgrading to the MBL requires migrating to the modern CMSG, DMSG, or EMSG sensor families. Internally, the piston relies on a heterogeneous two-way seal that retains grease, complemented by a self-lubricating front-cover bearing guide that reduces friction on the 12mm hard-chrome plated carbon-steel rod.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X90SCA |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X90SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X90SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×90 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA Is Used
Pivot-Arm Component Sorting
Drives a swinging sorter arm in a packaging line, utilizing the 402N push force and CA clevis to accommodate the arcing motion of diverting small plastic parts.
Package Flap Tucking
Extends 90mm to tuck cardboard flaps on a sealing conveyor, where the compact aluminum body fits neatly within tight side-frame clearances.
PCB Test Fixture Actuation
Moves a testing probe head into position using the -S magnet for precise end-of-stroke confirmation via a DS1-M switch before the electrical contact engages.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA with MBL32X90SCA
To replace the MAL32X90SCA, order the MBL32X90SCA. Verify your setup accommodates the PT tapered port thread, the M10x1.25 rod-end thread, and the CA pivot back cover, which swings on a pin to absorb arcing loads. Because this SKU has the -S magnet, plan to swap your existing CS1-M or DS1-M switches for CMSG, DMSG, or EMSG sensors on the MBL body.
If you need to adjust the force, stepping down to a 25mm bore yields 245N of push at 0.5MPa, while stepping up to a 40mm bore provides 628N. Note that the fixed rubber bumper softens end-of-stroke impacts but is not an adjustable air cushion; for deceleration control on the current line, specify the MBLC. Furthermore, a plain cylinder does not hold position if air pressure drops—install an external rod lock or pilot-operated check valve to prevent vertical load drift.
Upgrade checklist
- ✓ Order the MBL32X90SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X90SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA FAQ
Yes, the MAL32X90SCA is discontinued. The direct drop-in replacement is the MBL32X90SCA, which offers identical bore, stroke, output force, G1/8 port, and CA pivot mounting. You will need to update your position sensors, as the MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M units.
At 0.5MPa, the 32mm bore provides 402N of push force and 346N of pull force. At 0.7MPa, the push force increases to 563N, with a theoretical maximum of 82kgf at 1.0MPa. It operates on filtered air between 0.1-1.0MPa, supports speeds of 30-800mm/s, and uses a fixed rubber bumper rather than an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X90SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCA → MBL32X90SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X90SCA replacement with price, stock and lead time, usually within 7-8 hours.