This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X90SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X90SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X90SCM, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X90SCM
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM
The AirTAC MAL32X90SCM is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 90 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. AirTAC replaced this legacy unit with the MBL32X90SCM, a drop-in alternative retaining the exact same bore, stroke, output force, G1/8 port, and CM round-end mounting interface.
This SKU includes a built-in magnet (-S) for position sensing. On the older MAL body, which uses threaded front and back covers, this magnet pairs with legacy CS1-M or DS1-M switches. The modern MBL replacement features a riveted rolling-packed body and requires the current CMSG, DMSG, or EMSG sensor families. Both generations rely on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion, though an adjustable cushion is available if you step up to the MBLC variant.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X90SCM |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X90SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X90SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×90 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM Is Used
PCB Router Gantry
Drives a Z-axis routing spindle on an electronics PCB depaneling machine, utilizing the 90 mm stroke to clear the workbed for automated tool changes.
Vial Capping Press
Applies 402 N of push force at 0.5 MPa to crimp aluminum seals onto pharmaceutical vials, relying on the self-lubricating bearing guide for smooth repeatable descent.
Sorting Diverter Arm
Actuates a routing flap on a compact parcel conveyor, where the CM round-end back cover accommodates slight mechanical misalignment during high-speed package diversion.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM with MBL32X90SCM
To replace the MAL32X90SCM, order the MBL32X90SCM. Verify your 90 mm stroke, G1/8 port, PT thread form, and the CM round-end back cover. Because this SKU has the -S magnet, you must also upgrade your sensors: the MBL body does not support the older CS1-M or DS1-M switches, so plan to install CMSG, DMSG, or EMSG units instead. The fixed rubber bumper is identical, but if your application requires end-of-stroke deceleration, consider the MBLC32X90SCM which adds an adjustable air cushion.
For sizing flexibility, stepping down to a 25 mm bore drops the 0.5 MPa push force to 245 N, while stepping up to a 40 mm bore increases it to 628 N. Remember that a plain double-acting cylinder drifts when air pressure is lost; the bumper softens the stroke but does not lock the rod, so use an external rod lock for vertical or gravity-loaded applications.
Upgrade checklist
- ✓ Order the MBL32X90SCM (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X90SCM instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM FAQ
Yes, the MAL32X90SCM is discontinued. The exact drop-in replacement is the MBL32X90SCM, which matches the 32 mm bore, 90 mm stroke, G1/8 port, and CM round-end back cover. You must update your position sensors, as the MBL uses CMSG, DMSG, or EMSG switches instead of the older CS1-M or DS1-M models.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The cylinder uses a 12 mm carbon-steel rod with 20 um hard chrome plating and an M10x1.25 rod-end thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X90SCM replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X90SCM → MBL32X90SCM)
Tell us the quantity and destination — we quote the drop-in MBL32X90SCM replacement with price, stock and lead time, usually within 7-8 hours.