This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X950SU — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X950SU in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X950SU, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke950 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X950SU
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU
The AirTAC MAL32X950SU is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and a 950mm stroke. Because 950mm exceeds the 500mm maximum standard, this is a non-standard, made-to-order configuration. It delivers 402N push and 346N pull at 0.5MPa, operating via a G1/8 port. The exact drop-in replacement is the MBL32X950SU, matching the force, stroke, port, and U flat-end back cover.
This legacy SKU features a U flat-end back cover for rigid mounting and a built-in -S magnet. The original MAL body uses threaded front and back covers, whereas the modern MBL replacement utilizes a riveted rolling-packed body. Furthermore, the -S magnet on this discontinued unit functions with the older CS1-M and DS1-M switches, while upgrading to the MBL32X950SU requires the current CMSG, DMSG, or EMSG sensor family.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X950SU |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X950SU carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X950SU produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×950 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU Is Used
Pallet Transfer Gate
Actuates a 950mm routing flap on a packaging conveyor, using the 402N push force at 0.5MPa to deflect heavy cardboard cartons between sorting lanes.
Textile Beam Indexing
Shifts a yarn guide carriage across a 950mm weaving width, relying on the rigid U flat-end cover to maintain alignment during high-speed fiber drawing.
Vertical Parts Escapement
Lowers a small parts separator in an assembly fixture, where the -S magnet triggers a CS1-M sensor to confirm the 346N pull retraction before the next cycle.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU with MBL32X950SU
To replace the MAL32X950SU, order the MBL32X950SU. Verify your 32mm bore, 950mm stroke, G1/8 port, and PT tapered thread. The U flat-end back cover provides a rigid rear mount; if your application requires arcing movement, switch to a CA pivot cover. Because this SKU includes the -S magnet, note that your existing CS1-M or DS1-M switches will not fit the MBL; you must upgrade to CMSG, DMSG, or EMSG sensors. If you need adjustable cushioning at the end of this long stroke, step up to the MBLC series, as the MAL only provides a fixed rubber bumper.
For sizing flexibility, the next size down is the 25mm bore, providing 245N push at 0.5MPa, while the next size up is the 40mm bore, delivering 628N push at 0.5MPa. A 950mm stroke on a 12mm rod is highly susceptible to bending and side-load damage; an external guide rail or a pivot mount is strongly recommended to prevent rod deflection. Remember that this rubber bumper softens end-of-stroke impact but does not lock the rod; a plain MAL or MBL will drift if air pressure is lost, so add an external rod lock for vertical load holding.
Upgrade checklist
- ✓ Order the MBL32X950SU (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X950SU instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU FAQ
Yes, the MAL32X950SU is discontinued. The exact drop-in replacement is the MBL32X950SU, which matches the 32mm bore, 950mm stroke, G1/8 port, and U flat-end mounting. You must upgrade your sensors, as the MAL -S magnet works with CS1-M/DS1-M switches, but the MBL uses CMSG/DMSG/EMSG sensors.
The 32mm bore provides 402N push and 346N pull at 0.5MPa, 563N push at 0.7MPa, and a maximum theoretical force of 82kgf at 1.0MPa. It uses a fixed rubber bumper for end-of-stroke deceleration; it does not have an adjustable cushion. If adjustable cushioning is required for this 950mm stroke, use the MBLC series.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X950SU replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X950SU → MBL32X950SU)
Tell us the quantity and destination — we quote the drop-in MBL32X950SU replacement with price, stock and lead time, usually within 7-8 hours.