This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X100-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X100-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X100-CM (Discontinued) -> MBL40X100-CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X100-CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X100-CM is a discontinued double-acting aluminum mini round cylinder delivering 628 N of push force at 0.5 MPa. It features a 40 mm bore, a 100 mm stroke, and a CM round-end back cover. The exact drop-in replacement is the MBL40X100-CM, which matches the original bore, stroke, output force, G1/4 port, and mounting interface.
This legacy unit utilized threaded front and back covers on the barrel, whereas the modern MBL replacement uses a riveted rolling-packed body. Because this specific SKU lacks an -S magnet, it cannot support a position sensor. Additionally, the MAL relies on a fixed rubber bumper for end-of-stroke damping; if your application requires adjustable air cushioning, you should step up to the current MBLC series instead.
| Model | AirTAC MAL40X100-CM (Discontinued) -> MBL40X100-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X100-CM |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X100-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X100-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628 N of push at 0.5 MPa to eject small plastic parts from tight mold spaces, utilizing the CM round-end to accommodate slight angular misalignment.
Drives a 100 mm stroke diverting mechanism on a packaging line, where the G1/4 port delivers sufficient airflow for rapid 30-800 mm/s cycling.
Acts as a compact stop gate for lightweight pallets, with the 16 mm hard-chrome plated carbon steel rod absorbing repeated impact forces.
To replace the MAL40X100-CM, order the MBL40X100-CM, ensuring you keep the CM round-end back cover and the default PT tapered port thread. If you need to step down, the 32 mm bore offers 402 N push at 0.5 MPa; if you need more force, note that 40 mm is the largest available size in this mini round family. Since this SKU has no -S magnet, it cannot accept a CS1-M or DS1-M sensor, and the MBL equivalent would require CMSG or DMSG switches if you add a magnet. Remember that the fixed rubber bumper is not a lock; the rod will drift if air pressure is lost, so use an external rod lock for vertical loads. At 100 mm stroke, side-load bending is minimal, but always ensure the CM round-end pivots freely to prevent rod binding.
Upgrade checklist
Yes, the MAL40X100-CM is discontinued. The exact drop-in replacement is the MBL40X100-CM, offering the same 40 mm bore, 100 mm stroke, 128 kgf max force, G1/4 port, and CM round-end mounting. The MBL upgrades the body to a riveted rolling-packed design.
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X100-CM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X100-CM replacement with price, stock and lead time, usually within 7-8 hours.