This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X200-CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X200-CM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X200-CM (Discontinued) -> MBL40X200-CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X200-CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X200-CM is a discontinued double-acting aluminum mini round cylinder featuring a 40mm bore and 200mm stroke. Built for compact spaces, it delivers a robust 628 N push force and 528 N pull force at 0.5 MPa, peaking at 128 kgf. The exact drop-in replacement is the MBL40X200-CM, matching the original bore, stroke, G1/4 port, and CM round-end back cover exactly.
This legacy unit utilizes a fixed rubber bumper to soften end-of-stroke impacts and a heterogeneous two-way grease-retaining piston seal. Because this specific SKU lacks the -S magnet, it cannot support any position sensing. The modern MBL40X200-CM upgrade transitions from the old threaded front and back covers to a riveted rolling-packed body, maintaining identical ratings while modernizing the structural design.
| Model | AirTAC MAL40X200-CM (Discontinued) -> MBL40X200-CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X200-CM |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X200-CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X200-CM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×200 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628 N of push force at 0.5 MPa to eject small plastic parts from tight mold cavities where a larger ISO 15552 profile cylinder would not fit.
Actuates a pivot arm at 200mm stroke to redirect small product cartons between adjacent conveyor lines, utilizing the CM round-end for smooth arcing motion.
Drives a folding mechanism at 880 N push (0.7 MPa) to tuck top flaps on packaging lines prior to sealing, relying on the self-lubricating bearing guide.
To replace the MAL40X200-CM, order the MBL40X200-CM and verify your 16mm rod-end thread (M12x1.25) and PT port connections. The CM round-end back cover on this unit is designed for direct pivot mounting, which is highly recommended for this 200mm stroke to absorb arcing loads and prevent rod bending. If your application requires adjustable air cushioning—which the fixed rubber bumper on this MAL lacks—you must step up to the MBLC40X200 variant on the current line. For sizing flexibility, stepping down to the 32mm bore yields 402 N push at 0.5 MPa, while stepping up to the 50mm profile cylinder provides substantially higher force. Note that a plain MBL cylinder will drift and drop its load if air pressure is lost; use an external rod lock or pilot-operated check valve for fail-safe holding.
Upgrade checklist
Yes, the MAL40X200-CM is discontinued. The exact drop-in replacement is the MBL40X200-CM, which offers the same 40mm bore, 200mm stroke, 628 N push force, G1/4 port, and CM round-end mounting. The MBL upgrades the body from threaded covers to a riveted rolling-packed design.
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 880 N, with a maximum theoretical force of 128 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot take a position sensor; the -S version would use the older CS1-M/DS1-M switches, while the MBL replacement uses CMSG/DMSG/EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X200-CM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X200-CM replacement with price, stock and lead time, usually within 7-8 hours.