This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X210CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X210CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X210CA (Discontinued) -> MBL40X210CA is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X210CA, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X210CA is a discontinued double-acting aluminum mini round cylinder delivering 628 N push and 528 N pull at 0.5 MPa. Featuring a 40 mm bore, 210 mm stroke, G1/4 port, and a CA pivot back cover, its exact drop-in replacement is the MBL40X210CA, which matches the force, port size, and mounting.
Because this 210 mm stroke exceeds 300 mm, the 16 mm carbon-steel rod with 20 um hard chrome plating is susceptible to bending under side loads, making the CA pivot cover essential for arcing motion. This SKU lacks a magnet (-S), so it cannot accept a position sensor. The legacy MAL uses threaded covers and a fixed rubber bumper, whereas the MBL upgrade features a riveted rolling-packed body.
| Model | AirTAC MAL40X210CA (Discontinued) -> MBL40X210CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X210CA |
| Bore size | Ø40 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X210CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X210CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×210 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Swings a diverter arm on a packaging conveyor using the CA pivot to accommodate arcing motion while providing 628 N of push force at 0.5 MPa.
Pushes small metal blanks out of a die set, utilizing the 880 N force at 0.7 MPa and the self-lubricating front-cover bearing guide for repetitive motion.
Actuates a routing flap on a logistics line, where the fixed rubber bumper absorbs the 210 mm stroke impact without requiring external adjustment.
To replace the MAL40X210CA, order the MBL40X210CA, ensuring you keep the CA pivot back cover and default PT thread. If you need position sensing, you must upgrade to an MBL40X210SCA, as this legacy SKU has no magnet and cannot mount a CS1-M or DS1-M switch. The fixed rubber bumper cannot be adjusted; for adjustable air cushioning, step up to the current MBLC line. If 628 N at 0.5 MPa is excessive, step down to the 32 mm bore (402 N push); if you need more force, 40 mm is the largest MAL size. At 210 mm stroke, manage side-load by utilizing the CA clevis to allow pivot, or add an external guide. Note that a plain cylinder drifts when air is lost; use a pilot-operated check valve to hold a load.
Upgrade checklist
Yes, the MAL40X210CA is discontinued. The exact drop-in replacement is the MBL40X210CA, which offers the same 40 mm bore, 210 mm stroke, G1/4 port, and CA pivot mounting. The MBL upgrades the body to a riveted rolling-packed design while retaining the original force ratings.
At 0.5 MPa it provides 628 N push and 528 N pull; at 0.7 MPa it provides 880 N push, with a maximum theoretical force of 128 kgf at 1.0 MPa. Because this specific SKU lacks a built-in magnet (-S), it cannot accept a position sensor; legacy -S models used CS1-M/DS1-M switches, while the MBL replacement uses CMSG/DMSG/EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X210CA replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X210CA replacement with price, stock and lead time, usually within 7-8 hours.