This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X225SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X225SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X225SCM (Discontinued) → MBL40X225SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 225mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X225SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X225SCM is a discontinued double-acting aluminum mini round cylinder featuring a 40mm bore, 225mm stroke, a built-in magnet, and a CM round-end back cover. It delivers a push force of 628 N at 0.5 MPa and 880 N at 0.7 MPa, utilizing a G1/4 port and an M12x1.25 rod-end thread. AirTAC replaced this legacy series with the MBL40X225SCM, which serves as a true drop-in upgrade retaining the exact same bore, stroke, output force, port size, and CM mounting interface.
During this lifecycle transition, the construction shifted from the MAL's threaded front and back covers to the MBL's riveted rolling-packed body for greater structural integrity. Furthermore, because this specific SKU includes the -S magnet, the older CS1-M and DS1-M reed switches used on the MAL are superseded by the modern CMSG, DMSG, and EMSG sensor families on the MBL. The original MAL relies on a fixed rubber bumper to soften end-of-stroke impacts, whereas upgrading to the current MBLC variant provides an adjustable air cushion if your application requires stricter deceleration control.
| Model | AirTAC MAL40X225SCM (Discontinued) → MBL40X225SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X225SCM |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X225SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X225SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×225 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Ideal for pushing 40kg packaging pallets sideways at 90 degrees on a sorting line, utilizing the 628 N push force at 0.5 MPa to overcome friction reliably.
Automates the heavy sliding safety door of an enclosed CNC lathe, where the 225mm stroke fully clears the work area and the CM round-end pivot handles slight misalignment.
Drives a low-profile lifting flap to stage corrugated cardboard cartons, using the 880 N extension force at 0.7 MPa to lift bulky stacks in tight packaging machine spaces.
To replace the discontinued MAL40X225SCM, order the exact MBL40X225SCM drop-in equivalent, ensuring you match the 40mm bore, 225mm stroke, G1/4 port, PT tapered thread, and CM round-end back cover. Because this model includes the -S magnet, plan to update your position sensing inventory from the legacy CS1-M or DS1-M switches to the current CMSG, DMSG, or EMSG sensors. If your payload requires less force, stepping down to the 32mm bore yields 402 N of push force at 0.5 MPa; conversely, if you need more power, note that 40mm is the largest available size in this mini round series, offering a maximum of 128 kgf at 1.0 MPa. Keep in mind that a plain MBL does not hold its load when air pressure is lost, as the rod will drift; for vertical or suspended loads, integrate an external pilot-operated check valve or a dedicated rod lock. Additionally, at 225mm of stroke, the 16mm carbon-steel rod is susceptible to bending under offset loads, so utilizing the CM round-end pivot or an external guide rail is recommended to absorb arcing side-load forces.
Upgrade checklist
Yes, the MAL40X225SCM is discontinued. The exact drop-in replacement is the AirTAC MBL40X225SCM, which matches the 40mm bore, 225mm stroke, G1/4 port, and CM round-end mounting. You must update your sensors because the -S magnet on the MAL used CS1-M or DS1-M switches, while the MBL requires CMSG, DMSG, or EMSG switches.
The 40mm bore provides a push force of 628 N and a pull force of 528 N at 0.5 MPa, increasing to 880 N push at 0.7 MPa, with a theoretical maximum of 128 kgf at 1.0 MPa. It uses a G1/4 port, features a 16mm carbon-steel rod with an M12x1.25 rod-end thread, and operates at 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X225SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X225SCM replacement with price, stock and lead time, usually within 7-8 hours.