This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X230SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X230SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X230SCA Discontinued -> MBL40X230SCA is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 230mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X230SCA, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X230SCA is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 230mm stroke, delivering 628N push and 528N pull force at 0.5MPa. Its exact drop-in replacement is the MBL40X230SCA, which matches the bore, stroke, output force, G1/4 port, and CA pivot mounting. The legacy MAL features threaded front and back covers, whereas the current MBL uses a riveted rolling-packed body for equally robust performance.
This SKU includes a built-in magnet (-S) for position sensing; note that the original MAL works with older CS1-M/DS1-M switches, while the MBL successor requires CMSG/DMSG/EMSG sensors. The CA pivot back cover allows the cylinder to swing on a pin to absorb arcing loads, crucial for a 230mm stroke. It relies on a fixed rubber bumper for end-of-stroke deceleration, not an adjustable cushion.
| Model | AirTAC MAL40X230SCA Discontinued -> MBL40X230SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X230SCA |
| Bore size | Ø40 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X230SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X230SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×230 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Handles the diversion of loaded pallets by swinging a pivot arm, utilizing the 628N push force at 0.5MPa to reliably shift heavy goods between parallel conveyor belts.
Secures heavy cast iron blocks during machining operations, where the CA pivot back cover accommodates slight misalignment while the 880N force at 0.7MPa locks the part rigidly.
Pushes and folds corrugated cardboard flaps on high-speed packaging lines, relying on the 230mm stroke and self-lubricating bearing guide to cycle smoothly without manual grease.
To replace the MAL40X230SCA, order the MBL40X230SCA, ensuring you keep the 40mm bore, 230mm stroke, PT thread, and CA pivot back cover. Because this unit has the -S magnet, you must upgrade your sensors from the legacy CS1-M/DS1-M family to the current CMSG/DMSG/EMSG switches. If your application needs adjustable air cushioning rather than a fixed rubber bumper, step up to the MBLC40 variant on the current line.
For sizing flexibility, stepping down to the 32mm bore yields 402N push force at 0.5MPa, while stepping up to a larger ISO 15552 profile cylinder provides higher force if 880N at 0.7MPa is insufficient. At 230mm stroke, the 16mm carbon-steel rod is susceptible to bending under side loads; use the CA clevis to allow self-aligning articulation or add an external guide rail. Remember that a plain cylinder drifts when air is lost; add an external rod lock for position holding.
Upgrade checklist
Yes, the MAL40X230SCA is discontinued. The exact drop-in replacement is the MBL40X230SCA, which offers the same 40mm bore, 230mm stroke, 628N push force at 0.5MPa, G1/4 port, and CA pivot mounting. You only need to swap the sensor family from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 40mm bore cylinder has a 16mm carbon-steel rod with an M12x1.25 rod-end thread. At 0.5MPa it provides 628N push and 528N pull force; at 0.7MPa it provides 880N push force. The maximum theoretical force is 128kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X230SCA replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X230SCA replacement with price, stock and lead time, usually within 7-8 hours.