This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X260SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X260SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X260SCM (Discontinued) → MBL40X260SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X260SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X260SCM is a discontinued double-acting aluminum mini round cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Featuring a 40 mm bore, a 260 mm stroke, and a built-in magnet (-S) for position detection, this compact actuator was designed for tight-space automation. AirTAC has replaced this end-of-life unit with the MBL40X260SCM, a drop-in alternative that matches the original bore, stroke, output force, G1/4 port, and CM round-end back cover exactly.
The legacy MAL body utilized threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body for enhanced structural integrity. Because this SKU includes a magnet, it originally relied on CS1-M or DS1-M reed switches; upgrading to the MBL40X260SCM requires migrating to the modern CMSG, DMSG, or EMSG sensor family. Both generations use a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion, and neither can hold a load if air pressure drops.
| Model | AirTAC MAL40X260SCM (Discontinued) → MBL40X260SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X260SCM |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X260SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X260SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×260 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 880 N of thrust at 0.7 MPa to positively eject small plastic parts from tight mold cavities where a larger ISO 15552 profile cylinder would not fit.
Uses the 260 mm stroke to swing a diverter arm across a packaging line, relying on the CM round-end cover to articulate smoothly during the pivot motion.
Delivers the precise 628 N push at 0.5 MPa needed to tuck minor flaps on medium corrugated cartons before tape sealing, without crushing the board.
To replace the MAL40X260SCM, order the MBL40X260SCM and verify your setup matches its 40 mm bore, 260 mm stroke, G1/4 port, and PT tapered thread form. This specific SKU includes a CM round-end back cover and an S magnet, meaning you must upgrade your existing CS1-M or DS1-M sensors to CMSG, DMSG, or EMSG switches. If your application requires adjustable end-cushioning to absorb heavy kinetic energy, step up to the MBLC variant on the current line, as the MAL only provided a fixed rubber bumper.
When sizing this actuator, consider stepping down to the 32 mm bore neighbor if you need less force, which yields 402 N push at 0.5 MPa. Conversely, if you need to step up from the 32 mm bore (which provides 346 N pull at 0.5 MPa), this 40 mm model is the largest available option in the mini round series, delivering a maximum theoretical output of 128 kgf at 1.0 MPa. Because the 260 mm stroke exceeds 300 mm, the 16 mm carbon-steel rod is susceptible to bending under side loads; utilize the CM round-end back cover with a mating clevis to accommodate arcing motions, or add an external guide rail.
Upgrade checklist
Yes, the MAL40X260SCM is discontinued. The exact drop-in replacement is the MBL40X260SCM, which matches the 40 mm bore, 260 mm stroke, G1/4 port, CM cover, and S magnet. You must update your sensors, as the older CS1-M/DS1-M switches are replaced by CMSG/DMSG/EMSG switches on the MBL.
The 40 mm bore cylinder has a 16 mm carbon-steel rod with an M12x1.25 rod-end thread. It generates 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum theoretical force of 128 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X260SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X260SCM replacement with price, stock and lead time, usually within 7-8 hours.