This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X60CAH — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X60CAH in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X60CAH (Discontinued) → MBL40X60CAH is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X60CAH, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X60CAH is a discontinued double-acting aluminum mini round cylinder. It features a 40mm bore and 60mm stroke, generating 628N push and 528N pull force at 0.5MPa. The exact drop-in replacement is the MBL40X60CAH, matching the bore, stroke, G1/4 port, and CA pivot mounting exactly.
This legacy unit uses threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body. Because this specific SKU lacks an -S magnet, it cannot support a position sensor. The rod is 16mm carbon steel with a 20um hard chrome plating, guided by a self-lubricating bearing. End-of-travel relies on a fixed rubber bumper, not an adjustable cushion.
| Model | AirTAC MAL40X60CAH (Discontinued) → MBL40X60CAH |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X60CAH |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X60CAH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X60CAH produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Drives a pivoting diverter gate on a packaging conveyor. The 628N push force at 0.5MPa easily moves small cardboard cartons, while the CA clevis accommodates the arc of the swinging arm.
Actuates the fabric take-up roller mechanism in a textile machine. The 16mm hard-chrome rod withstands repetitive cycling, and the compact 60mm stroke fits tight loom clearances.
Applies downward pressure to cap glass bottles on a rotary filling line. The 880N push at 0.7MPa provides consistent capping force, and the fixed rubber bumper prevents hard mechanical crashes.
To replace the MAL40X60CAH, order the MBL40X60CAH. Verify your 60mm stroke, 40mm bore, PT thread port, and CA pivot back cover. The CA clevis allows the body to swing on a pin, which is ideal for arcing loads. Since this SKU lacks an -S magnet, it cannot accept a CS1-M or DS1-M sensor; if you need position detection on the new MBL, add the -S option and upgrade to CMSG/DMSG/EMSG switches.
If you need to step down, the 32mm bore neighbor provides 402N push at 0.5MPa. If you need more force, you are at the largest MAL size and must switch to a larger ISO 15552 profile cylinder. The fixed rubber bumper softens stroke ends, but if you need adjustable air cushioning, step up to the MBLC. Note that this cylinder cannot hold a load if air pressure drops; use an external rod lock for failsafe positioning.
Upgrade checklist
Yes, the MAL40X60CAH is discontinued. The exact drop-in replacement is the MBL40X60CAH. It shares the identical 40mm bore, 60mm stroke, G1/4 port, and CA pivot mounting. The main upgrade is a riveted rolling-packed body replacing the old threaded covers.
The 40mm bore generates 628N push and 528N pull at 0.5MPa, 880N push at 0.7MPa, and a maximum theoretical force of 128kgf at 1.0MPa. Because this specific SKU lacks an -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X60CAH replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X60CAH replacement with price, stock and lead time, usually within 7-8 hours.