This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X750SCM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X750SCM in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X750SCM (Discontinued) → MBL40X750SCM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 750mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X750SCM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X750SCM is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 750mm stroke. Because 750mm exceeds the 500mm standard limit, this is a non-standard, made-to-order stroke. It delivers 628N push and 528N pull at 0.5MPa. The exact drop-in replacement is the MBL40X750SCM, matching the bore, stroke, force, G1/4 port, and CM round-end back cover.
This SKU includes a built-in magnet (-S) and a CM round-end back cover. The legacy MAL uses threaded front and back covers, whereas the current MBL features a riveted rolling-packed body. The -S magnet on this MAL pairs with older CS1-M or DS1-M switches; upgrading to the MBL requires switching to CMSG, DMSG, or EMSG sensors. The carbon-steel rod has a 20um hard chrome plating, and the self-lubricating front-cover bearing guide supports the heterogeneous two-way grease-retaining seal.
| Model | AirTAC MAL40X750SCM (Discontinued) → MBL40X750SCM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X750SCM |
| Bore size | Ø40 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X750SCM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X750SCM produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×750 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Ejects 1.2m MDF panels from a CNC router using 628N of push force at 0.5MPa over the 750mm span.
Feeds 700mm steel bar stock into a lathe chuck, relying on the 16mm rod and CM round-end to handle axial alignment.
Transfers heavy pallets across a 750mm gap, requiring the full 128kgf peak thrust at 1.0MPa to overcome inertia.
To replace the MAL40X750SCM, order the MBL40X750SCM, ensuring you keep the CM round-end back cover, the -S magnet, and the PT threaded G1/4 port. If you need to step down to the next size, the 32mm bore provides 402N push at 0.5MPa; if you need more force, note that 40mm is the largest available MAL/MBL mini round bore, delivering 128kgf max at 1.0MPa. The fixed rubber bumper is not an adjustable cushion; for end-of-stroke energy absorption, step up to the MBLC variant. A 750mm stroke on a 16mm rod is highly susceptible to bending, so an external guide or pivot mount is essential. Furthermore, this cylinder will drift if air pressure is lost, so use an external rod lock for position holding.
Upgrade checklist
Yes, the MAL40X750SCM is discontinued. The exact drop-in replacement is the MBL40X750SCM, offering the same 40mm bore, 750mm stroke, G1/4 port, and CM round-end cover. You will need to update your sensors, as the MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
The 40mm bore delivers 628N push and 528N pull at 0.5MPa, 880N push at 0.7MPa, and a maximum theoretical force of 128kgf at 1.0MPa. The 750mm stroke is non-standard and made-to-order.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X750SCM replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X750SCM replacement with price, stock and lead time, usually within 7-8 hours.